Leader Pumps ECOPLUS 230 Multi-Stage Self Priming Pump - 1/2 HP - 27 GPM - 51 psi - 115V/60Hz - 1 in NPT

Quiet Self Priming Water Movement - 1/2 HP

Pumps that lose prime when air enters the line waste time and interrupt irrigation. This multi-stage, self priming centrifugal pump keeps drawing liquid even when air bubbles are present, and it runs quietly. It moves up to 27 GPM and builds up to 51 psi, with a maximum head of 118 ft.

At 1/2 HP on standard 115V/60Hz power, this unit suits home gardeners and regular indoor growers who need dependable water supply, pressurization or transfer for irrigation and hydroponic systems without a larger three-phase setup.

Key Features & Benefits

• Self priming design — restarts reliably even with air in the line.
• Multi-stage impellers — deliver high flow and pressure from a compact pump.
• Thermic overload protection — helps protect the motor from overheating.
• Wear resistant shaft and impellers — support long service life.
• Double seal between motor and hydraulic section — adds protection for the motor.

Who Should Use Leader Pumps ECOPLUS 230

Growers and gardeners who need a quiet, plug-in pump for irrigation, water supply, pressurization or general water movement, using clean water and 1 in NPT plumbing.

About Leader Pumps ECOPLUS 230

The Leader Pumps ECOPLUS 230 is a horizontal-shaft, multi-stage, self priming centrifugal pump. It is rated 1/2 HP, 800 W and 8.0 A on 115V/60Hz, with a 27 GPM maximum flow rate, 118 ft maximum head, 51 psi maximum pressure and 1 in NPT inlet and outlet fittings. It measures 18.4 x 9.2 x 11.2 in.

Frequently Asked Questions

Q: What does self priming mean?
A: A self priming pump can clear air from its suction line and start drawing liquid on its own. This makes startup easier when air bubbles are present.

Q: What size are the pump connections?
A: The inlet and outlet are both 1 in NPT. Use matching fittings or adapters for your plumbing.

Q: What power supply does it need?
A: It runs on 115V at 60Hz and draws 8.0 A. Confirm your circuit can handle that load.

Q: What does head mean on a pump?
A: Head is the height the pump can lift water against gravity. This pump is rated for a maximum head of 118 ft.

Q: Does the motor have overheating protection?
A: Yes. The motor has thermic overload protection to help guard against overheating.

Q: Is it suited to nutrient solutions?
A: The listing describes it for domestic water, irrigation and general water movement. Check chemical compatibility of your solution before using it.