Ideal Air Commercial Grade Humidifier - 75 Pints - 12.2 x 12.2-in

Water-Line Humidity for Small Sealed Rooms - 75 Pints per Day

Dry air in propagation and vegetative rooms slows growth, and refilling a tank every day wastes time. This humidifier connects to your water line with 1/4" tubing (user-supplied) and runs continuously. It outputs up to 75 pints per day (about 0.4 gal/hr) through a multi-directional fogging head.

At 160-320 sq ft of coverage, this unit suits clone rooms, early vegetative spaces and smaller sealed rooms. Actual coverage varies with ceiling height and how much humidity you need. Larger rooms may need more than one unit.

Key Features & Benefits

• Multi-directional adjustable fogging head — directs moisture across the room to reduce dry pockets.
• Water-line connection — runs without daily tank filling.
• Up to 75 pints per day — gives steady output for rooms with high humidity demand.
• 62 dBA noise level — keeps operating noise moderate for work areas.
• 12.2 x 12.2 in footprint — fits on a bench or floor without taking much space.

Who Should Use Ideal Air Commercial Grade Humidifier

Growers who run propagation rooms, early vegetative rooms or small climate-controlled spaces will get the most from it. It suits both home and commercial growers who want hands-off humidity in a compact room.

About Ideal Air Commercial Grade Humidifier

Ideal Air makes this 75-pint humidifier for grow-room environment control. It runs on 110V / 60 Hz, draws 0.9 A (about 99 W) and weighs about 15 lb shipped. A manual is available as a PDF.

Frequently Asked Questions

Q: How much area does it cover?
A: It covers 160-320 sq ft. Ceiling height and the humidity you need change the real figure.

Q: Does it need a tank?
A: No. It connects to a water line with 1/4" tubing. You supply the tubing and fittings.

Q: What power does it need?
A: It runs on 110V / 60 Hz and draws 0.9 A, about 99 W.

Q: How loud is it?
A: It runs at 62 dBA.

Q: What is a fogging head?
A: The fogging head is the outlet that releases fine moisture into the room. This one is adjustable and multi-directional, so you can aim the output.

Q: Can I automate it?
A: A humidity controller can switch it to hold a setpoint. Check that the controller's rating suits the unit's 0.9 A draw.