FloraFlex Quick Disconnect Set

Tool-Free Connector for Fast Bubbler Removal and Cleaning

Threading and re-taping a bubbler fitting every time it needs cleaning wastes time and eventually chews up the threads on a pipe fitting. The FloraFlex Quick Disconnect Set eliminates that step by linking a Flora Valve to a FloraFlex Bubbler, or to a 3/4 inch MPT pipe fitting, with a push-style connection that needs no Teflon tape or threading during assembly.

One side uses a standard 3/4 inch garden hose thread while the other carries a 1/2 inch thread sized for FloraFlex Bubblers. The leak-free ABS housing and rubber grip make it easy to operate by hand, even with wet gloves during routine maintenance.

Key Features & Benefits

• 3/4 inch GHT x 1/2 inch FPT — garden hose thread on one side, FloraFlex-compatible thread on the other.
• No threading required — push-style connection eliminates the need for Teflon tape during assembly.
• Leak-free sealed design — prevents drips at the connection point during normal operation.
• Quick bubbler removal — disconnects in seconds for routine bubbler cleaning or swaps.
• Durable ABS construction with rubber grip — stands up to repeated connect and disconnect cycles and is easy to grip by hand.

Who Should Use This Quick Disconnect Set

Growers running FloraFlex manifold systems who need to pull bubblers for cleaning or swap flow inserts regularly get the most value from this set, since it avoids re-taping or re-threading every time a line is serviced.

About FloraFlex Fittings

FloraFlex builds its Quick Disconnect hardware to a shared 3/4 inch and 1/2 inch thread standard that runs across its irrigation line, so this set works interchangeably with FloraFlex Bubblers and standard MPT pipe fittings from any commercial-grade cultivation supply chain.

Frequently Asked Questions

Do I need Teflon tape with this fitting?

No, the quick disconnect is designed to seal without tape or threading. That's the main advantage over a standard threaded pipe connection.

What does the 3/4 inch GHT side connect to?

It threads onto a Flora Valve or a standard 3/4 inch MPT pipe fitting. Both connections use the same garden hose thread, so no adapter is needed.

How do I remove a bubbler without tools?

Pull the disconnect collar back and lift the bubbler free, no wrench or tape removal required. Reattaching is just as fast, since the bubbler's 1/2 inch fitting presses back into place until it seats.

When should I use this instead of threading directly?

Use it whenever a bubbler or fitting needs to come off regularly, such as for cleaning between grow cycles or swapping flow inserts. A direct-threaded connection is fine for permanent fittings that never need to be removed.

What is the fitting made of?

It's made of durable ABS plastic with a rubber grip for easy hand operation. The ABS housing is built to hold up to repeated connect and disconnect cycles without cracking.