FloraFlex QDPS Multi Flow Bubbler, Elbow, 3/4"

Ready-to-Install Multi Flow Bubbler Kit with 3/4in Elbow Fitting

Building a bubbler manifold from separate pipe fittings, disconnects, and bubblers means sourcing and sizing three parts correctly before anything gets installed. The FloraFlex Quick Disconnect Pipe System (QDPS) Multi Flow Bubbler, Elbow bundles a 3/4 inch elbow Flora Pipe Fitting, a Flora Valve Quick Disconnect, and a Multi Flow Bubbler into one ready-to-install kit, letting the assembly turn a corner when routing from a vertical riser or wall-mounted valve into a horizontal feed line.

Every part of the QDPS system locks together without glue or threading, so the full assembly goes together or comes apart in seconds for maintenance. Once assembled, the Multi Flow Bubbler distributes water and nutrients through 8 barbed ports sized for 1/4 inch OD tubing, with 4 color-coded inserts (2, 6, 10, and 20 GPH) so each outlet can be tuned to a different flow rate.

Key Features & Benefits

• 3-piece kit — includes a 3/4 inch elbow fitting, Quick Disconnect, and Multi Flow Bubbler in one assembly.
• 3/4 inch Elbow fitting — Letting the assembly turn a corner when routing from a vertical riser or wall-mounted valve into a horizontal feed line.
• No glue or threading — all QDPS parts connect and separate without tools, glue, or tape.
• 4 interchangeable inserts — color-coded inserts at 2, 6, 10, and 20 GPH for per-outlet flow control.
• 8-outlet bubbler — the included Multi Flow Bubbler distributes to up to eight feed lines.
• Fast assembly — the complete kit assembles in seconds for quick installation or swaps.

Who Should Use the Elbow Multi Flow Kit

This kit suits growers setting up a manifold where the feed line needs to turn a corner, such as routing down from an overhead valve or around a support post, while getting the per-outlet flow control of a Multi Flow Bubbler.

About the FloraFlex QDPS System

FloraFlex designs its Quick Disconnect Pipe System components to snap together without glue or threading across its full catalog of fittings and bubblers, so growers can build or reconfigure a manifold without specialized plumbing tools.

Frequently Asked Questions

What three parts are included in this kit?

This kit includes a 3/4 inch elbow Flora Pipe Fitting, a Flora Valve Quick Disconnect, and a Multi Flow Bubbler. All three are sized to connect without additional adapters.

What size is the elbow fitting?

It's sized at 3/4 inch, matching FloraFlex's standard pipe fitting size. That sizing carries through the rest of the assembly to the Quick Disconnect and bubbler.

Do I need glue or tape to assemble this kit?

No, all QDPS parts connect without glue, tape, or threading. Each connection is push-fit, so the kit assembles or comes apart with hand pressure alone.

How many outlets does the included bubbler have?

The Multi Flow Bubbler has 8 outlets, fed from the single 1/2 inch inlet on the kit. Each of those outlets can take a different color-coded insert to set its own flow rate.

How do I assemble the QDPS Elbow kit?

Press the elbow Flora Pipe Fitting onto the supply line, snap the Flora Valve Quick Disconnect onto it, then attach the Multi Flow Bubbler to the disconnect. Each connection is push-fit, so no glue, tape, or threading tools are needed during assembly or later disassembly.

Can I disconnect just one part for cleaning?

Yes, each component in the QDPS system can be disconnected individually. That means a grower can pull just the bubbler for cleaning without breaking down the fitting or disconnect.