SuperSpore Infrared Sterilizer - 110V - 240W - 825°C Max - Porcelain

Clean Tools at the Work Station Without a Flame - 110V Benchtop Unit

Dirty blades and tips can carry contamination from one plant to the next, and alcohol lamps add open flame and fuel to the bench. The SuperSpore Infrared Sterilizer replaces them with an electric, high-temperature porcelain chamber that sits at your work station. It reaches a maximum temperature of 825°C ± 50°C (1500°F ± 122°F) and offers two temperature settings.

This unit is sold singly and suits a propagation bench, tissue culture area or lab corner where small tools are cleaned between cuts. Hobbyists can use it for one bench, and commercial teams can place one at each work station.

Key Features & Benefits

• Porcelain chamber — a wear-resistant, high-temperature material built for repeated heating.
• Two temperature settings — choose 400°C (750°F) or 850°C (1500°F) to match the job.
• 10-minute heating time — the unit is ready for use after a short warm-up.
• Compact footprint — it measures 13 x 13 x 13 in as shipped and fits on a work bench.
• 110V, 240W, 60Hz — it runs from a standard North American outlet.

Who Should Use SuperSpore Infrared Sterilizer

Growers, propagators and lab technicians who cut, trim or transfer plant material and want a flame-free way to sterilize small tools between uses.

About SuperSpore Infrared Sterilizer

The SuperSpore Infrared Sterilizer is an electric tool sterilizer rated 110V, 240W and 60Hz with a 250V 3A fuse. The sterilizing chamber is 35 mm (1.4 in) in diameter and 100 mm (3.9 in) long. The product weighs 3.087 lb.

Frequently Asked Questions

Q: How long does it take to heat up?
A: The listed heating time is 10 minutes. Allow that time before you start working.

Q: What temperatures does it offer?
A: It has two settings, 400°C (750°F) and 850°C (1500°F). The maximum temperature is 825°C ± 50°C (1500°F ± 122°F).

Q: How does it compare with an alcohol lamp?
A: An electric sterilizer needs no fuel and has no open flame. You set the temperature and wait for it to heat instead of tending a burner.

Q: What conditions should I use it in?
A: The working temperature is 5°C to 40°C (40°F to 100°F), and relative humidity should be 90% or lower.

Q: What is the chamber made of?
A: The chamber is porcelain, a ceramic that withstands high heat and wear.

Q: Are there any safety precautions?
A: Yes. The chamber and tools get very hot, so use heat-safe handling and keep the unit on a stable surface away from flammable materials.