Fast Fit® Rolling Bench Height Reduction Kit — 4in Leg

Cut 14 Inches Off Your Rolling Bench — 4in Leg Height Reduction Kit

The Fast Fit Rolling Bench Height Reduction Kit swaps in four shorter, 4-inch legs to bring the Fast Fit Rolling Bench Tray Stand #706113 down from its standard 27.25in overall height to a low-profile 13.125in. That's roughly a 14-inch drop, useful for grow tents, low-clearance rooms, or any layout where you need trays closer to the floor. The kit includes all four replacement legs plus the screw pack needed to complete the swap.

Key Features & Benefits

• 27.25in Down to 13.125in: A roughly 14-inch height reduction using four 4in legs.
• Complete Kit: Four replacement legs and a screw pack included — no extra hardware to source.
• Purpose-Built for #706113: Engineered specifically for the Fast Fit Rolling Bench Tray Stand.
• Low-Profile Result: Ideal for grow tents and height-restricted rooms needing more canopy-to-light clearance.

Who Should Use This

Growers running the Fast Fit Rolling Bench Tray Stand #706113 who need a lower working height than the standard 27.25in configuration. Common cases include grow tents, low-ceiling rooms, and flood-and-drain setups where a lower tray position improves accessibility or fits tighter vertical space.

Compatibility

Compatible exclusively with the Fast Fit Rolling Bench Tray Stand #706113. Not designed for Fast Fit Continuous Bench components, standard Fast Fit Tray Stands, or the 6pc general Height Reduction Kit (HGC706118). Check your stand model before ordering, or confirm with your dealer if you're unsure.

About Fast Fit

Fast Fit is a Hawthorne Gardening Company brand of tray stands, rolling benches, and continuous benching components, now under Vireo Growth — the accessory line grew out of the 2018 acquisition of Sunlight Supply, the distributor historically tied to this product family.

Frequently Asked Questions

What height does the Rolling Bench become after installing this kit?

Installing the four 4in legs reduces the Fast Fit Rolling Bench Tray Stand #706113 from its standard 27.25in height down to 13.125in. That's a reduction of roughly 14 inches from the standard configuration.

Is the screw pack included?

Yes. The kit includes both the four 4in legs and the screw pack required for installation, so there's no separate hardware to track down.

Can this kit be used on the Fast Fit Continuous Bench system?

No. This kit is designed specifically for the Rolling Bench Tray Stand #706113 and is not compatible with Continuous Bench components, which use a different frame and leg mounting configuration.

When should I choose this kit instead of the 6pc Height Reduction Kit (HGC706118)?

Choose this 4in Leg Kit only if you own the Rolling Bench Tray Stand #706113 — it's engineered specifically for that stand's leg mounts. If you're working with a standard Fast Fit bench rather than the Rolling Bench, HGC706118's 6-piece kit is the correct part instead.