Active Aqua 2.0 Infinity Tray, 5' x 4' (Division Tray)

One Interlocking Piece, One Continuous Commercial Tray

Commercial benches lose growing space at every seam where separate trays meet — gaps that catch debris, leak runoff, and break up what should be one continuous surface.

The Active Aqua 2.0 Infinity Tray system by Staal Plast solves that by interlocking End, Middle, and Division sections into a single continuous tray, and this 5' x 4' Division section caps a section of the run and lets you set the exact length of a continuous tray run by joining at this point.

Every Infinity Tray setup is built in the same order — one End Tray w/Drain, up to seven Middle Trays, one Division Tray, and one End Tray — sealed at each joint with Staal Plast Polystyrene glue (STP3010, sold separately) for a permanent, low-profile run up to 65' long.

Key Features & Benefits

• 5' x 4' division section — sets where one continuous run ends and the next begins, and can be cut to size at the top of the block to fine-tune your overall length.
• Low-profile 2.5" height with no arch lip — maximizes usable inner tray space across the entire run.
• UV-stable, 100% recyclable High Impact Polystyrene (HIPS) — holds up to years of continuous commercial use without breaking down.
• Glue-sealed joints (Staal Plast STP3010, sold separately) — create a permanent, leak-resistant connection between every section in the run.
• Shallow grooves for easy cleaning — keep maintenance simple across a tray system that can stretch up to 65' long.
• Built for standard 4' and 5' wide commercial benches — including Active Aqua IZON Rolling Bench Systems, the AARBK48 4x8 Rolling Bench, and IGE benches.

Who Should Use the 5' x 4' Infinity Tray Division Tray

This section suits commercial growers building or expanding an Infinity Tray run on a 5'-wide bench who need a division section sized at 5' x 4' to complete their layout — whether you're assembling a new system from scratch or adding length to an existing one.

How an Infinity Tray Run Goes Together

Every 2.0 Infinity Tray setup follows the same required order: one End Tray w/Drain (6.5' length) starts the run, up to seven Middle Trays (6.5' length each) extend it, one Division Tray (2' or 4' length) sets where the run ends or splits, and one End Tray (6.5' length) closes it out — all sealed together with Staal Plast Polystyrene glue (STP3010, sold separately) for a maximum continuous length of 65'. Download the 2.0 Infinity Tray Installation Guide for full assembly details before you start gluing sections together.

Frequently Asked Questions

What role does this specific section play in the system?

This is the 5' x 4' Division Tray — it caps a section of the run and lets you set the exact length of a continuous tray run by joining at this point, and sets where one continuous run ends and the next begins, and can be cut to size at the top of the block to fine-tune your overall length.

What's the correct order to assemble an Infinity Tray run?

Every setup must include, in order: one End Tray w/Drain, up to seven Middle Trays, one Division Tray, and one End Tray — that sequence is what completes a sealed, continuous run.

How are the sections joined together?

Each joint is sealed with Staal Plast Polystyrene glue (item STP3010, sold separately), which permanently bonds adjoining sections into one continuous, low-profile tray.

How long can a complete Infinity Tray run be?

Up to 65 feet — achieved by combining the required End Tray w/Drain, Middle Trays, Division Tray, and End Tray in the correct sequence and gluing each joint securely.

What benches is this system designed to work with?

It's built for standard 4' and 5' wide commercial benches, including Active Aqua IZON Rolling Bench Systems, the Active Aqua 4x8 Rolling Bench (AARBK48), and IGE benches.