General Hydroponics TrueFlo™ Irrigation Line Cleaner 1gal

General Hydroponics TrueFlo™ Irrigation Line Cleaner 1gal — System Hygiene & Flow Restoration

General Hydroponics TrueFlo™ Irrigation Line Cleaner is a professional-grade formulation engineered to deep-clean irrigation systems used in indoor cultivation and commercial growing environments. Over time, drip lines, emitters, manifolds, and reservoirs accumulate mineral salt deposits, organic biofilm, algae, and nutrient residue that restrict flow, harbor pathogens, and reduce system efficiency. TrueFlo™ dissolves and flushes these deposits, restoring unrestricted flow and a clean, hygienic system baseline for each new growing cycle.

TrueFlo™ is designed for use during system cleanouts between cycles, as a maintenance flush mid-cycle, or as a targeted treatment for clogged emitters and lines. Its powerful formulation breaks down both inorganic mineral scaling and organic residue, providing a comprehensive clean that standard water flushes cannot achieve.

Key Features & Benefits

• Mineral Salt Dissolution: Effectively breaks down calcium, magnesium, and other mineral salt deposits that accumulate inside drip lines, emitters, and fittings — restoring full flow rate and preventing blockages that can cause uneven distribution of nutrients.
• Biofilm & Algae Removal: Targets organic biofilm and algae that colonize reservoir walls, tubing interiors, and pump components. Removing biofilm eliminates a major reservoir for root pathogens and reduces the risk of disease pressure in recirculating systems.
• Nutrient Residue Flushing: Clears accumulated nutrient residues from all system components, providing a clean starting point for each new crop cycle and preventing nutrient lockout or contamination from previous feed programs.
• Emitter & Dripper Maintenance: Safe to use for soaking clogged drip emitters and micro-sprinklers to restore optimal flow, reducing the need for costly emitter replacements and ensuring uniform water and nutrient distribution across your growing environment.
• System Longevity: Regular use of TrueFlo™ extends the service life of pumps, tubing, fittings, and reservoirs by preventing the corrosive and obstructive effects of mineral buildup and organic fouling.

Who Should Use This

TrueFlo™ is essential for any grower using recirculating hydroponic systems, drip irrigation, NFT channels, ebb and flow tables, or aeroponics. Commercial indoor cultivation operations benefit especially from TrueFlo™ as part of a structured between-cycle maintenance protocol. Home growers using drip systems or flood tables will also appreciate how effectively TrueFlo™ restores system performance and protects their equipment investment.

Compatibility

TrueFlo™ is compatible with all standard growing system materials including PVC, polyethylene, and polypropylene tubing; rubber and silicone gaskets; plastic and stainless-steel reservoirs; and most pump and fitting materials. Always rinse the system thoroughly with clean water after using TrueFlo™ before reintroducing plants or nutrients. Not intended for use as a plant nutrient or growing media amendment.

Frequently Asked Questions

When should I use TrueFlo™ in my growing cycle?

TrueFlo™ is most commonly used during the system cleanout between crop cycles — after harvest and before starting a new grow. It can also be used as a periodic maintenance flush mid-cycle if line clogging or biofilm buildup is observed, following label directions carefully to avoid plant contact.

Is TrueFlo™ safe for my pump and irrigation fittings?

Yes. TrueFlo™ is formulated for compatibility with standard hydroponic system materials including PVC, polyethylene, and polypropylene tubing, as well as most pump housings and fittings. Always follow label instructions regarding contact times and rinsing procedures.

How long should I let TrueFlo™ soak in my system?

Soak times vary depending on the severity of mineral and biofilm buildup. Refer to the product label for specific contact time recommendations. For heavily fouled systems, a longer soak followed by multiple clean water flushes will yield the best results.

Can I use TrueFlo™ on clogged drip emitters?

Yes. TrueFlo™ is excellent for soaking clogged emitters and drip lines to dissolve mineral blockages and restore flow. Remove emitters, soak in a TrueFlo™ solution, rinse thoroughly, and reinstall.

Do I need to flush the system after using TrueFlo™?

Yes. It is important to thoroughly rinse your irrigation system with clean water after using TrueFlo™ before reintroducing nutrient solution or plants. This ensures no cleaner residue remains in the system.