HydroLogic® HyperLogic® Standard Anti-Scalant - 45 lb Jug

HydroLogic HyperLogic Standard Anti-Scalant -- 45 lb Jug

HydroLogic HyperLogic Standard Anti-Scalant is a broad-spectrum, phosphorous-free anti-scalant concentrate formulated for use with HyperLogic Commercial, Industrial, and Heavy-Industrial Series RO systems. It inhibits the formation of calcium carbonate scale on RO membranes, extending membrane service life and reducing maintenance frequency. When used with HyperLogic Chemical Injector Systems, this anti-scalant provides a cost-effective alternative to water softeners, eliminating the downtime and regeneration process associated with traditional softener systems. Certified by NSF to NSF/ANSI Standard 60 for Drinking Water Treatment Chemicals. Must be diluted prior to use, and once opened should be used within 1 year. Available in a 45-lb jug. Formerly HyperLogic HL 11903.

Key Features & Benefits

• Prevents Calcium Carbonate Scale Formation: Broad-spectrum anti-scalant chemistry inhibits the nucleation and growth of CaCO3 scale on RO membrane surfaces, a primary cause of premature membrane fouling in hard-water systems.
• Phosphorous-Free Formulation: Avoids phosphorous discharge concerns associated with phosphonate-based anti-scalants, important for operations with environmental discharge compliance requirements.
• Cost-Effective Alternative to Water Softeners: Eliminates the downtime and regeneration cycle associated with traditional water softeners while providing effective scale inhibition.
• NSF/ANSI Standard 60 Certified: Certified for use as a Drinking Water Treatment Chemical, meeting NSF/ANSI Standard 60 safety and performance requirements.
• Extends Membrane Life: Regular anti-scalant use prevents scale accumulation that increases pressure drop, reduces permeate flow, and shortens membrane service life.

Who Should Use This

Essential for operators of HydroLogic HyperLogic Commercial, Industrial, and Heavy-Industrial RO systems in hard-water environments where calcium carbonate scale is a recurring challenge. Particularly well-suited for operations seeking to eliminate water softener systems in favor of chemical injection anti-scaling.

Compatibility

For use with HydroLogic HyperLogic Commercial, Industrial, and Heavy-Industrial Series RO systems with Chemical Injector Systems. Must be diluted before use -- refer to the HyperLogic Owner's Manual for proper dilution and injection ratio. Store temperature-controlled, away from sunlight. Use within 1 year of opening. NSF/ANSI Std 60 certified. Available in 45 lb jug. Formerly HL 11903.

Frequently Asked Questions

How do I dilute this product before use?

This anti-scalant concentrate must be diluted prior to use, so refer to the HyperLogic Owner's Manual for the correct dilution ratio and injection rate for your specific system. Using the wrong ratio can under-protect the membrane or waste concentrate.

Is this product phosphorous-free?

Yes. HydroLogic HyperLogic Standard Anti-Scalant is phosphorous-free, making it suitable for operations with environmental phosphorous discharge restrictions.

Is this product NSF certified?

Yes. This product is certified by NSF to NSF/ANSI Standard 60 for Drinking Water Treatment Chemicals, a recognized standard for chemicals used in drinking water treatment.

Why is anti-scalant better than a water softener?

Water softeners require periodic regeneration cycles that take the system offline and waste water as drain-to-waste. Chemical injection anti-scalant provides continuous scale prevention without regeneration downtime, reducing operational interruptions and water waste.