HydroLogic® HyperLogic® Low pH RO Membrane Cleaning Powder - 25 lb Pail

HydroLogic® HyperLogic® Low pH RO Membrane Cleaning Powder - 25 lb Pail

The HydroLogic® HyperLogic® Low pH Membrane Cleaning Powder is an acid-based cleaning formulation specifically designed to remove Calcium Carbonate scale, hardness deposits, iron, and mineral scale buildup from HyperLogic® Industrial and Heavy-Industrial Series RO membranes. Mineral scale is one of the primary causes of reduced permeate flow and decreased salt rejection in RO systems — regular acid cleaning removes these deposits before they permanently damage membrane surfaces. Used as part of a scheduled membrane maintenance SOP, this low-pH powder extends membrane service life and maintains system efficiency. Available in a 25-lb pail. Formerly HyperLogic HL 13560.

Key Features & Benefits

• Low pH (acid) cleaning chemistry — Acid formulation effectively dissolves Calcium Carbonate scale, hardness deposits, iron, and mineral scale that alkaline cleaners cannot remove.
• Targets mineral scale specifically — Formulated to address the most common inorganic fouling challenges in commercial and industrial RO systems operating with hard source water.
• Extends membrane life — Regular acid cleaning prevents irreversible mineral scale damage to membrane surfaces, extending service life and delaying replacement.
• Restores permeate flow — Removal of mineral scale deposits restores water permeability through the membrane, recovering flow rates reduced by fouling.
• Designed for HyperLogic® systems — Formulated for use with HyperLogic® Industrial and Heavy-Industrial Series RO systems per the documented maintenance protocol.

Who Should Use This

Required for HydroLogic® HyperLogic® Industrial and Heavy-Industrial Series RO system operators working with hard or mineral-rich source water. Use as part of your scheduled membrane maintenance SOP when reduced permeate flow or reduced salt rejection is observed, or on a preventive schedule per your Operational Manual.

Compatibility

For use with HydroLogic® HyperLogic® Industrial and Heavy-Industrial Series RO membrane systems. Use as directed in your HyperLogic® Operational Manual. Available in 25 lb pail. Formerly HL 13560. Complement with HyperLogic® High pH Cleaning Powder (HGC741685) for organic fouling removal.

Frequently Asked Questions

When should I use the Low pH cleaning powder?

Use when your RO shows reduced permeate flow or lower-than-normal salt rejection. Also use on a scheduled preventive basis per your SOP, especially in systems operating with hard or mineral-rich source water.

What does the Low pH powder remove?

It removes Calcium Carbonate scale, hardness deposits, iron, and mineral scale buildup from RO membrane surfaces.

Do I need both the High pH and Low pH powders?

A complete membrane cleaning protocol typically alternates between acid (low pH) cleaning for mineral scale and alkaline (high pH) cleaning for organic fouling. Both powders are part of a comprehensive HyperLogic® maintenance program.

How is this product applied?

Follow the membrane cleaning procedure in your HyperLogic® Operational Manual for correct dilution, temperature, circulation time, and flushing protocol.

What is the case size?

Available in a 25 lb pail. Contact Cannavista for pricing on multiple units.