GreenClean® Acid Cleaner - 55-Gallon Drum

GreenClean Acid Cleaner, 55-Gallon Drum — Mineral Deposit & Scale Remover

Hard water leaves calcium, bicarbonate, and rust deposits on greenhouse glazing and inside irrigation piping that a standard detergent cannot touch, since those are mineral scale problems rather than organic soil. GreenClean Acid Cleaner is built specifically for that job, combining sulfuric acid with non-foaming surfactants to break down calcium, rust, bicarbonate buildup, whitewash coatings, and oxide scale, all without emitting fumes or odor despite its mineral-acid base.

This 55-Gallon Drum container runs non-foaming, making it a fit for cleaning inside piping and drip irrigation lines where foam would be counterproductive, and works as the first half of a two-step protocol completed by ZeroTol 2.0 or SaniDate 5.0.

Key Features & Benefits

• Breaks down mineral deposits and scale — removes calcium, bicarbonate, iron oxide, and hard-water deposits from structures and piping.
• Removes whitewash and oxide buildup — lifts stubborn coatings from polycarbonate, glass, concrete, and metal.
• Odorless despite its mineral-acid base — improves working conditions during application.
• Non-foaming formula — fits piping and drip irrigation cleaning where foam generation is a problem.
• First step in a two-step sanitation protocol — pairs with ZeroTol 2.0 or SaniDate 5.0 for complete disinfection.

Who Should Use This

Greenhouse and nursery facility teams performing between-crop cleanouts or scale removal in irrigation piping, in this 55-Gallon Drum size, are the direct fit for GreenClean Acid Cleaner.

About BioSafe Systems

BioSafe Systems, founded in 1998 and headquartered in Connecticut, manufactures the GreenClean line of cleaners alongside its SaniDate and ZeroTol disinfectant products.

Frequently Asked Questions

What does GreenClean Acid Cleaner remove?

It removes calcium and other hard-water mineral deposits, bicarbonate, iron rust, whitewash coatings, scale, and oxide buildup from greenhouse structures, equipment, and irrigation piping. It is a cleaning product rather than a disinfectant.

How do I apply this safely?

This product carries a Danger signal word and contains sulfuric acid, so wear the chemical-resistant gloves, eye protection, and protective clothing called for on the label. Always read all label directions before use.

Does this product create fumes during use?

No, it is formulated to be odorless despite containing mineral acids, which improves working conditions during application. Standard chemical-handling PPE is still required regardless of odor.

What is the recommended sanitation sequence with this cleaner?

Apply GreenClean Acid Cleaner first to remove mineral and organic deposits, then follow with ZeroTol 2.0 or SaniDate 5.0 for disinfection. This two-step sequence removes the scale a disinfectant alone would not address.