Netafim Manual Disc Filter - 3/4-in MPT x MPT - 140 Mesh - 1-17 GPM

Disc Filtration That Protects Emitters From Clogging - 3/4-in MPT x MPT

Debris in irrigation water clogs emitters and drip lines and interrupts feeding. This filter stacks polypropylene discs into a cylindrical element. Water pressure compresses the discs, and debris is trapped in their grooves so only clean water reaches your system. The design is built to run year after year with very little maintenance.

This 140 mesh unit with 3/4-in male pipe thread connections suits small to mid-size irrigation and hydroponic water lines flowing at 1-17 GPM. It fits hobby setups and regular indoor grows. Commercial growers can combine several units into a modular filter battery.

Key Features & Benefits

• Stacked disc rings — trap debris in grooves and release only clean water to the system.
• 140 PSI maximum pressure — handles typical pressurized irrigation lines.
• Reinforced polyamide body and cover — a durable housing for long service.
• Stainless steel clamps and EPDM rubber O-rings — hold the housing closed and seal it.
• Stand-alone or modular — start with one filter and add more later.

Who Should Use Netafim Manual Disc Filter

Growers who run drip or hydroponic water lines and want to protect emitters from sediment and particles. It suits home gardeners, indoor growers and commercial operations that need filtration within a 1-17 GPM flow range.

About Netafim Manual Disc Filter

Netafim makes irrigation equipment. This manual disc filter has a reinforced polyamide body and cover, polypropylene disc rings, EPDM rubber O-rings and stainless steel clamps. It has 3/4-in MPT x MPT connections, a 1-17 GPM flow range and a 140 PSI maximum pressure. It is sold each.

Frequently Asked Questions

Q: How does a disc filter work?
A: Water pressure compresses a stack of grooved discs together. Water flows through the grooves, which trap debris. Only clean water continues to the irrigation system.

Q: What flow rate does this filter handle?
A: It is rated for 1-17 GPM. Stay within that range for the best filtration performance.

Q: What is the maximum operating pressure?
A: The maximum pressure is 140 PSI. Keep your line pressure below that figure.

Q: What does MPT x MPT mean?
A: MPT means male pipe thread. Both the inlet and outlet have 3/4-in male threads, so they connect to female fittings.

Q: Can I use more than one filter?
A: Yes. The filter works alone or combined with others in a modular filter battery for higher flow needs.

Q: What does 140 mesh mean?
A: Mesh describes how fine the filtration is. A higher number means finer openings that catch smaller particles.