Hydro-Logic® Hyperlogic® 6K GPD Chlorine City Skid — Single-Phase (1P)

A Chlorine Commercial Reverse Osmosis Skid System for Municipal Water, 6K GPD Single-Phase

Commercial cultivation operations feeding multiple rooms need water treatment that scales past what a countertop or single-stage RO unit can deliver, and that arrives pre-assembled rather than requiring the operation to plumb together a custom filtration rack. The Hydro-Logic Hyperlogic City Skid is a pre-plumbed, leak-tested reverse osmosis system built on a stainless steel frame, combining a stainless steel high-pressure RO pump, 5-micron pre-filtration, and an Automatic Recycle Control System (ARC) that reuses runoff water rather than sending it to drain as waste.

This 6K GPD (6,000 gallons per day) configuration is built single-phase to match the electrical service most commercial cultivation facilities of that scale already run, and it's designed for municipal (city) water treated with chlorine. City Skid units are built for municipal water systems, where chlorine or chloramines are added by the utility as a disinfectant.

Key Features & Benefits

• Stainless steel high-pressure RO pump — drives water through the system's reverse osmosis membranes at commercial volume
• 5-micron pre-filtration — removes sediment ahead of the RO membranes to protect them from fouling
• Automatic Recycle Control System (ARC) — reuses runoff water instead of sending it to drain as waste
• 6K GPD (6,000 gallons per day) output — sized for municipal (city) water treated with chlorine
• Built single-phase — matched to the electrical service most commercial facilities of this scale already run
• Pre-plumbed, leak-tested stainless steel skid frame — arrives assembled and tested rather than requiring the operation to build a custom filtration rack

Who Should Use This Skid System

Commercial cultivation operations that need 6K GPD of consistently filtered water for municipal source water, on a single-phase electrical service, will use this Hyperlogic skid as the water treatment backbone for their facility.

About Hydro-Logic

Hydro-Logic has built water purification equipment for roughly 20 years, including the reverse-osmosis Stealth-RO and Hyperlogic lines for gardening, hydroponic, residential, and commercial use. The company designs its systems around water-saving reverse-ratio RO technology intended to reduce wasted drain water compared to conventional RO setups, and builds its commercial Hyperlogic skids with stainless steel membrane pressure vessels, brass fittings, and a microprocessor controller, pre-plumbed and leak-tested before shipping.

Frequently Asked Questions

How much water does this system produce?

This configuration produces 6,000 gallons per day (GPD) of filtered water. Hydro-Logic offers other Hyperlogic capacities for facilities that need more or less daily output.

What electrical service does this unit need?

This configuration is built single-phase, matched to the electrical service most commercial cultivation facilities of this scale already run. Confirm your facility's available service before ordering, since single-phase and three-phase units are not interchangeable.

Is this system built for city water or well water?

It's built for municipal (city) water treated with chlorine. Hydro-Logic also offers a Well Skid line for private well water, which is configured differently since it isn't treating utility-added chlorine or chloramines.

How does the Automatic Recycle Control System reduce waste?

The ARC system reuses runoff water from the reverse osmosis process instead of routing it straight to drain, which cuts down on the wastewater a standard RO system would otherwise produce. This makes the skid more water-efficient than a comparable RO setup without a recycle control system.

Does this system arrive ready to install?

Yes, the skid ships pre-plumbed and leak-tested on a stainless steel frame, so it arrives assembled rather than requiring the operation to build a custom filtration rack from individual components. Site plumbing and electrical hookup are still required for installation.