Growonix UV Sterilization System for EX100-GX400 - 1 GPM - 120 VAC - 1/4-in Quick Connect - Stainless Steel

Ultraviolet Water Treatment for Small RO Systems - 1 GPM

Water that sits in a reservoir or comes from a private well can carry micro-organisms into your irrigation lines. This Growonix unit adds a stainless steel ultraviolet stage after your filter, so treated water reaches your plants. The distributor lists it as designed to remove 99.9% of micro-organisms.

At 1 GPM maximum flow and 1/4-in fittings, this single unit suits small to mid-size indoor setups, such as a hobby room or a compact hydroponic system built around a small RO unit. It is not sized for high-volume commercial lines.

Key Features & Benefits

• Stainless steel construction — a durable housing for the ultraviolet lamp.
• 1/4-in quick connect input and output — tubing connects without extra adapters or tools.
• 85 PSI maximum feed pressure — a stated limit helps you match it to your supply.
• 5000-hour lamp life — the stated lamp life lets you plan replacement.
• 120 VAC with a 6W ballast — it runs from a standard household outlet.

Who Should Use Growonix UV Sterilization

Growers who run a small RO system, treat well water, or store water between uses. It is a good fit for those who want an added treatment stage ahead of irrigation.

About Growonix UV Sterilization

Growonix lists this unit as model GOUV-1530. It measures 16.8 x 5.5 x 4 in and ships at 3 lb. It has no audible alarm. An owner's manual is available as a PDF.

Frequently Asked Questions

Q: Which systems does it fit?
A: The distributor lists EX100, EX200, EX400, GX150, GX200, GX300, GX400, MiniScrub and ALK-US systems. Check your system model before ordering.

Q: What is the maximum flow rate?
A: The maximum flow rate is 1 GPM. Flow above that reduces how long water is exposed to the light, so keep your system within the rating.

Q: Does it alert me when the lamp fails?
A: No. The unit has no audible alarm, so track lamp hours and replace the lamp on a schedule. The stated lamp life is 5000 hours.

Q: What does a quick connect fitting mean?
A: It is a push-in tube fitting that seals without threading or clamps. This unit uses 1/4-in quick connects on both input and output.

Q: What power does it need?
A: It needs a 120 VAC supply. The ballast is rated at 6W.

Q: Can I use it with well water?
A: The distributor describes it as suited to well water treatment and to stored water. Test your water and follow the owner's manual for setup.