Netafim Manual Disc Filter - 1-in MPT x MPT - 140 Mesh - 5-26 GPM

Keep Irrigation Lines Clear of Debris - 1-in MPT x MPT

Debris in irrigation water clogs emitters and lines and interrupts feeding. This manual disc filter stacks plastic rings into a cylindrical element. Water pressure compresses the rings, and debris is trapped in the ring grooves while clean water passes on to the system. The design is built for efficient operation year after year with little maintenance.

This unit has 1-in MPT x MPT connections and 140 mesh filtration, and it handles flows from 5 to 26 GPM. It suits small to mid-sized hydroponic systems and drip setups. You can use it alone or combine several units into a modular filter battery as your system grows.

Key Features & Benefits

• Disc ring element — traps debris in the ring grooves and releases clean water to the system.
• Flow range of 5-26 GPM — covers a wide span of small to mid-sized irrigation setups.
• Rated to 140 PSI maximum pressure — gives headroom on pressurized lines.
• Reinforced polyamide body and cover — a durable housing for the filter element.
• Stainless steel clamps and EPDM rubber O-rings — hold the housing closed and seal it.

Who Should Use Netafim Manual Disc Filter

Growers who run drip or hydroponic irrigation and want to protect emitters and lines from clogging will find this filter useful. Home gardeners and commercial operations can both use it, alone or as part of a modular battery.

About Netafim Manual Disc Filter

Netafim makes this manual disc filter with 1-in MPT x MPT connections and 140 mesh filtration. The disc rings are polypropylene, the body and cover are reinforced polyamide, the O-rings are EPDM rubber and the clamps are stainless steel. It is rated for 5-26 GPM and up to 140 PSI.

Frequently Asked Questions

Q: How does a disc filter work?
A: Stacked grooved rings are pressed together by water pressure. Water flows through the grooves, and debris is trapped there. Only clean water continues to the irrigation system.

Q: What flow rate does this filter handle?
A: It is rated for 5 to 26 GPM. Choose a unit whose range matches your system's flow.

Q: What is the maximum pressure?
A: The maximum pressure is 140 PSI. Keep your line pressure below that figure.

Q: Can I use more than one filter?
A: Yes. The filter works as a stand-alone unit or combined with others to form a modular filter battery, which suits larger systems.

Q: What does 140 mesh mean?
A: Mesh describes filtration fineness. A higher number means smaller particles are held back.

Q: What are the connections?
A: The filter has 1-in MPT x MPT connections, meaning male pipe thread on both ends.