HydroLogic® BIGboy™ Sediment Filter - Pleated - Cleanable - Replace Every 6 Months - 20in x 4.5in

HydroLogic® BIGboy™ Sediment Filter - Cleanable Pleated Design for Extended Service Life

The HydroLogic® BIGboy™ Sediment Filter is a pleated, cleanable sediment filter designed for BIGboy™ water filtration systems. Unlike single-use poly-spun filters, the pleated design of this filter can be cleaned by simply rinsing with a garden hose — removing accumulated silt, rust, dirt, sand, and sediment to restore flow and filtration performance without the cost and waste of a full cartridge replacement. Replace the filter every 6 months regardless of cleaning history for reliable, consistent sediment removal performance.

Key Features & Benefits

• Cleanable pleated design: Pleated filter media provides high surface area and can be rinsed clean with a hose — extending service life and reducing replacement frequency and cost.
• Reduces silt, rust, dirt, sand, and sediment: Captures a broad range of particulate contaminants to protect downstream system components from wear and clogging.
• 6-month replacement interval: Replace every 6 months as part of routine system maintenance — regardless of how many cleanings have been performed — to maintain optimal filtration performance.
• OEM fit for BIGboy™ systems: Precisely sized for BIGboy™ filter housings for a correct, leak-free fit.

Who Should Use This

Required replacement filter for HydroLogic® BIGboy™ water filtration system operators. Regular filter maintenance keeps sediment from bypassing the system and reaching downstream irrigation components or RO membranes.

Compatibility

For use with HydroLogic® BIGboy™ systems. Replace every 6 months. Dimensions: 20in x 4.5in.

Frequently Asked Questions

How do I clean the pleated sediment filter?

Remove the filter from the housing, rinse thoroughly with a garden hose to dislodge and flush away accumulated sediment, and reinstall. Do not use high-pressure washing or brushes that could damage the pleated media.

If I clean it regularly, do I still need to replace it every 6 months?

Yes — HydroLogic® recommends replacing the sediment filter every 6 months regardless of cleaning history. Over time, pleated media degrades and loses filtration efficiency even after cleaning.

What size is this filter?

This filter measures 20in x 4.5in.

What sediment does this filter remove?

This filter reduces silt, rust, dirt, sand, and general sediment particles from source water.