Grow1 TechLock Elbow Compression Fitting - 20mm - 25 Count

Tool-Free Right-Angle Tubing Joins - 25 Fittings

Changing tubing direction usually means clamps, glue or special tools, and slow work across long runs. These elbow compression fittings lock onto drip tubing with a push-and-twist motion, so you make a clean right-angle turn without extra hardware. The 20mm elbow is rated for 0-100 PSI and 67 ft-lbs of pull-out resistance.

One unit holds 25 elbows. That covers a mid-sized hydroponic layout, a bench expansion or a set of drip line corners. Growers running larger installations can order several units to keep a consistent fitting across a whole system.

Key Features & Benefits

• Push-and-twist connection — installs without clamps, glue or special tools.
• Elbow shape — turns tubing at a right angle where lines meet walls, benches or corners.
• Pressure rating of 0-100 PSI — suits a wide range of irrigation and hydroponic water lines.
• Temperature range of 32°F-140°F — handles typical cool and warm water conditions.
• Dark colour — blends with dark dripline tubing for a neat finish.

Who Should Use Grow1 TechLock Elbow Compression Fittings

Use them if you build or maintain drip irrigation, hydroponic systems or greenhouse water lines and want fast, repeatable connections. They suit both home growers expanding a setup and commercial crews installing many joints.

About Grow1 TechLock Elbow Compression Fittings

Grow1 makes the TechLock line of compression fittings for irrigation, hydroponics and drip systems. This 20mm elbow is designed for 1/4" or 1/2" drip tubing. Listed tubing specifications are an inside diameter of 0.530"-0.560", an outside diameter of 0.600"-0.660" and a wall thickness of 0.035"-0.050".

Frequently Asked Questions

Q: Do I need tools to install these fittings?
A: No. The fitting locks onto tubing with a push-and-twist motion. You do not need clamps, glue or special tools.

Q: Which tubing do they fit?
A: They are listed for 1/4" or 1/2" drip tubing. Check that your tubing falls within the listed inside diameter, outside diameter and wall thickness ranges before ordering.

Q: Can I reuse the fittings?
A: The distributor describes them as designed for easy reuse. Inspect the fitting and tubing end each time and replace any piece that looks worn or damaged.

Q: What does pull-out resistance mean?
A: It is the force a connection withstands before the tubing separates from the fitting. This fitting is listed at 67 ft-lbs.

Q: What pressure and temperature can they handle?
A: The listed operating pressure is 0-100 PSI. The working temperature range is 32°F-140°F.

Q: How many fittings come in one unit?
A: One unit contains 25 elbow fittings.