Grow1 TechLock Elbow Compression Fitting - 17mm - 25 Count

Right-Angle Drip Line Connections - 17mm

Tubing that kinks at a corner restricts flow and loosens at the joint. These elbow compression fittings give drip and hydroponic lines a clean 90-degree turn and grip the tubing with compression instead of glue. The listing rates them for 0-100 PSI operating pressure and 67 ft-lbs of pull-out resistance.

This unit holds 25 fittings. That quantity suits growers who are plumbing several branches or a full irrigation layout in one pass, and it leaves spares for later changes to a hydroponic system.

Key Features & Benefits

• Elbow compression design — turns tubing at a right angle without a separate bend.
• Fits 1/4 or 1/2 inch drip tubing — one fitting type covers both listed tubing sizes.
• 0-100 PSI operating pressure — handles typical low-pressure irrigation and hydroponic lines.
• 32°F-140°F working temperature range — suits typical indoor and greenhouse conditions.
• Dark colour — blends with dark tubing for a tidy installation.

Who Should Use Grow1 TechLock Elbow Compression Fittings

Home gardeners and commercial growers building or expanding drip irrigation, hydroponic systems or greenhouse watering lines will find these useful wherever tubing must change direction.

About Grow1 TechLock Elbow Compression Fitting

Grow1 makes the TechLock line of compression fittings for irrigation and hydroponics. This 17mm elbow fits tubing with an inside diameter of 0.530"-0.560", an outside diameter of 0.600"-0.660" and a wall thickness of 0.035"-0.050".

Frequently Asked Questions

Q: What tubing does this fitting work with?
A: It is listed for 1/4 or 1/2 inch drip tubing. Check that your tubing falls within the listed inside diameter of 0.530"-0.560" and outside diameter of 0.600"-0.660".

Q: What does a compression fitting do?
A: A compression fitting seals and holds tubing by squeezing it as the fitting is engaged. It avoids glue and is a common choice for irrigation lines.

Q: What pressure can it handle?
A: The listed operating pressure is 0-100 PSI. Keep your system within that range.

Q: How much force does it resist before pulling off?
A: The listed pull-out resistance is 67 ft-lbs. Support long tubing runs so the fittings do not carry unnecessary strain.

Q: What temperatures is it rated for?
A: The listed working temperature range is 32°F-140°F. That covers most indoor and greenhouse conditions.

Q: How many fittings come in one unit?
A: One unit holds 25 elbow fittings, and the product is sold as a single unit.