Grow1 Food Grade Clear Poly Tubing - 3/16 in ID x 1/4 in OD - 100 ft

Clear Small-Bore Line for Water and Air Runs - 100 ft

Small hydroponic setups need thin line that you can cut to length and inspect easily. This Grow1 tubing is clear, so you can see flow, trapped air or debris without disconnecting anything. It has a 3/16 in inner diameter and a 1/4 in outer diameter, which suits small feed lines, drip branches and air lines.

One roll holds 100 ft of tubing. That is enough to plumb several benches or a small to mid-size indoor room, and it is easy to trim for short branch runs. Commercial growers can keep it on hand for repairs and small line replacements.

Key Features & Benefits

• Clear wall — lets you check flow and see blockages at a glance.
• 3/16 in inner diameter — suits small-bore water and air connections.
• 1/4 in outer diameter — matches fittings sized for 1/4 in tubing; confirm the fit before ordering.
• 100 ft length — gives you enough line to cut many custom runs from one roll.
• Food grade designation — as named by the brand, for use in plant-feeding setups.

Who Should Use Grow1 Food Grade Clear Poly Tubing

Home gardeners building a hydroponic system, and licensed commercial growers maintaining small feed or air lines, will both find it useful. It suits anyone who wants a visible, easy-to-cut line.

About Grow1 Food Grade Clear Poly Tubing

Grow1 Food Grade Clear Poly Tubing, product code 843100, is sold as one 100 ft roll. It measures 3/16 in inner diameter by 1/4 in outer diameter. The packaged unit measures 7 x 7 x 3 in and ships at 1.5 lb.

Frequently Asked Questions

Q: What are the tubing dimensions?
A: The inner diameter is 3/16 in and the outer diameter is 1/4 in. The roll is 100 ft long.

Q: Can I use it for both water and air?
A: It is intended for small-bore hydroponic water and air lines. Check your pump or fitting specifications for pressure and size before connecting.

Q: Does clear tubing allow algae growth?
A: Light passing through clear tubing can encourage algae in lines carrying nutrient solution. Shield runs from light, or use opaque tubing where that is a concern.

Q: What does ID and OD mean?
A: ID is the inner diameter, the width of the bore the liquid or air flows through. OD is the outer diameter, which determines what fittings the tubing fits.

Q: How do I cut it cleanly?
A: Use a sharp tubing cutter or razor blade and make a square cut. A clean end seals better on barbed fittings.

Q: How much comes in one order?
A: One order is a single roll of 100 ft.