FloraFlex Tubing 1/4 Inch OD

Food-Grade Vinyl Feed Line for FloraFlex Irrigation Systems

Wiring up a multi-plant top-feed system only works as well as the tubing carrying water to each site, and mismatched hose diameters or splices are a common source of leaks in a DIY irrigation run. FloraFlex 1/4 Inch OD Tubing is a flexible, food-grade vinyl hose sized specifically to match the FloraFlex tool lineup, so it connects directly to FloraClips, FloraCaps, and bubblers without adapters.

Each roll runs 100 feet at a 1/4 inch outer diameter and 3/16 inch inner diameter, enough to wire multiple plants or zones from one continuous length. It's manufactured in FloraFlex's signature green color with the FloraFlex logo printed along its length, making feed lines easy to trace inside a crowded tent or row.

Key Features & Benefits

• 100 foot continuous length — provides enough tubing to wire multiple plants or zones without splicing mid-run.
• 1/4 inch OD / 3/16 inch ID — sized to fit snugly with FloraClips, bubblers, and other FloraFlex connectors.
• Food-grade vinyl construction — flexible enough to route around equipment without kinking.
• FloraFlex green with printed logo — color-coded and branded along its length for quick line identification.
• Universal FloraFlex fit — connects to the full FloraFlex tool lineup for automated top feeding.

Who Should Use This Tubing

This tubing suits growers building or expanding a FloraFlex top-feeding setup, from single-tent hobbyists to larger multi-row operations that need consistent, color-coded lines connecting bubblers, caps, and clips.

About FloraFlex

FloraFlex Corporation manufactures commercial-grade cultivation supplies in-house, including coco coir substrates, irrigation hardware, and plant support products, from facilities in Los Angeles, California and Columbus, Ohio. Its tubing and fittings are built to a shared sizing standard so every FloraFlex component connects without adapters.

Frequently Asked Questions

What is the tubing's outer and inner diameter?

It measures 1/4 inch OD and 3/16 inch ID. That sizing is matched to FloraClips, bubblers, and other FloraFlex fittings, so no adapters are needed.

How long is each roll?

Each roll runs 100 continuous feet. That's typically enough to wire several plants or a full zone from one length without splicing.

Does this tubing fit all FloraFlex tools?

Yes, it's sized to connect with the full FloraFlex tool lineup, including bubblers, caps, and clips. The 1/4 inch OD sizing is consistent across FloraFlex's irrigation hardware.

How do I cut and connect the tubing?

Cut the tubing to the length needed for each plant or zone, then push each end onto a FloraClip, FloraCap circulator, or bubbler barbed port. No clamps or sealant are required since the fittings are sized for a snug push-fit connection.

Why is the tubing green with a printed logo?

The green color and printed FloraFlex logo make it easy to identify feed lines in a setup with multiple hose runs. That's especially useful in larger operations where several irrigation lines share the same space.