Aeromixer The Hose - 1-in x 50-ft - Brass End Couplings

Move Feed and Water Faster Across the Grow Room - 50 ft

Slow, narrow tubing stretches out every feeding and watering session. This hose uses a 1-in bore to carry more volume than narrower lines, and it is made for use with Aeromixer pumps and sump pumps. Double-walled braided nylon and brass end couplings give it a rated bursting pressure of 650 PSI.

At 50 ft, this single hose reaches across a mid-sized indoor room or between a reservoir and distant beds. Home growers can run one length from a sump pump, while commercial growers can add lengths to cover larger layouts.

Key Features & Benefits

• 1-in hose diameter — carries more volume per minute than narrower tubing.
• Double-walled braided nylon — gives the hose a sturdy build for repeated use.
• Heavy duty brass end couplings — provide durable connection points at both ends.
• 650 PSI bursting pressure — leaves ample margin above typical pump pressures.
• Made for Aeromixer and sump pumps — pairs with the pumps this hose was designed around.

Who Should Use Aeromixer The Hose

Growers who feed and water from a reservoir or sump and want to cut the time spent on each session. It suits hydroponic setups, indoor rooms and larger cultivation spaces that need a long, high-volume run.

About Aeromixer The Hose

Aeromixer The Hose is a 1-in, 50-ft hose sold each. It is built with double-walled braided nylon and heavy duty brass end couplings, and its bursting pressure is rated at 650 PSI. It is listed as compatible with Aeromixer products and sump pumps.

Frequently Asked Questions

Q: Can I connect this hose to a standard home spigot?
A: No. A 1-in hose does not attach to standard home spigots. Use it with pumps and fittings sized for 1-in connections.

Q: What pumps does it work with?
A: It is listed as compatible with Aeromixer products and sump pumps. Check your pump's outlet size before ordering.

Q: What does bursting pressure mean?
A: Bursting pressure is the pressure at which a hose is expected to fail. This hose is rated at 650 PSI, well above normal working pressure, so you should never run it near that figure.

Q: Why choose a 1-in hose over a narrower one?
A: A wider bore moves more liquid in the same time, which shortens feeding and watering sessions. It also needs matching 1-in pump outlets and fittings.

Q: What are the end couplings made of?
A: The end couplings are heavy duty brass. They are built to hold up to repeated connecting and disconnecting.