Leader Pumps VERTY GO 600 Automatic Submersible Pump - 1/2 HP - 52 GPM - 1.25-in NPT - 115V/60Hz

Automatic Water Removal for Tight Pits - 1/2 HP

Reservoir pits and sumps fill up, and a pump you must switch on by hand is easy to forget. This submersible pump runs automatically and also has a manual override, so you can start it yourself when you need to. It is designed for narrow pits and moves up to 52 GPM of clear water.

This single-unit 1/2 HP pump suits growers who need dependable drainage or transfer from a compact pit in an indoor room, greenhouse or small commercial facility, on standard 115V power.

Key Features & Benefits

• Automatic operation with manual override — runs without attention and can still be started by hand.
• Narrow-pit design — the 7.8 in width suits compact pits and sumps.
• Up to 52 GPM and 30 ft of head — moves water quickly and lifts it to a useful height.
• Handles small particles — passes particles up to 1/4 in in diameter in clear water.
• 1.25-in NPT fitting — threads directly to matching plumbing.

Who Should Use Leader Pumps VERTY GO 600

Growers who need to empty or transfer clear water from reservoirs, sumps or pits, from home gardeners to commercial operations with a 115V supply.

About Leader Pumps VERTY GO 600

The VERTY GO 600 is a submersible pump rated at 1/2 HP, 600W and 6.8A on 115V/60Hz. It has a maximum flow of 52 GPM, a maximum head of 30 ft and a maximum pressure of 13 psi. It measures 9.2 x 7.8 x 13.3 in.

Frequently Asked Questions

Q: What does the manual override do?
A: The pump normally starts and stops automatically. The manual override lets you run it by hand when you want to. Use it for direct control.

Q: What does maximum head mean?
A: Maximum head is the greatest vertical height the pump can lift water. This pump is rated at 30 ft. Flow drops as the lift height rises.

Q: Can it pump water with debris?
A: It handles particles up to 1/4 in in diameter in clear water. It is not rated for larger solids.

Q: What size discharge connection does it use?
A: It has a 1.25-in NPT fitting. Use matching threaded plumbing or an adapter.

Q: What power supply does it need?
A: It runs on 115V/60Hz and draws 6.8A at 600W. Confirm your circuit suits that load.