Leader ECODIVER 750 Submersible Pump - 1/2 HP - 1,560 GPH - 38 PSI - 115V

Leader ECODIVER 750 Submersible Pump -- 1/2 HP, 1,560 GPH

The Leader ECODIVER 750 is a highly reliable submersible multistage pump engineered for high flow and pressure in demanding environments. Built with anti-corrosive, rust-proof materials and wear-resistant shafts and impellers, it handles continuous-duty operation with confidence. Anti-debris stainless steel strainers and thermal overload motor protection extend service life. Excellent motor cooling design allows operation even when only partially submerged -- a critical advantage in fluctuating water level applications.

Key Features & Benefits

• 1/2 HP / 1,560 GPH / 38 PSI / 89ft Max Head: High-performance submersible output for demanding applications.
• Anti-Corrosive & Rust-Proof Construction: Built for long-term use in harsh water environments.
• Anti-Debris Stainless Steel Strainer: Protects impellers from particulate damage.
• Thermal Overload Motor Protection: Shuts down safely if the motor overheats.
• Partial Submersion Capable: Excellent motor cooling allows operation even when not fully submerged.

Specifications

• Power: 750W / 8.0A | Voltage: 115V/60Hz
• Horsepower: 1/2 HP | Max Flow: 26 GPM
• Max Head: 89ft | Max Pressure: 38 PSI

Who Should Use This

Growers, irrigators, and facility operators who need a reliable, high-pressure submersible pump for water transfer, irrigation boosting, or pressurized delivery from below-grade sources.

Compatibility

1in discharge. 115V/60Hz. 16ft power cord. No float valve included.

Frequently Asked Questions

Does this pump include a float valve for automatic operation?

No -- the ECODIVER does not include a float valve. An external float switch can be wired in for automatic start/stop based on water level if that control is needed.

Can this pump run when only partially submerged?

Yes -- the ECODIVER features excellent motor cooling that allows partial submersion operation, a key advantage in environments with fluctuating water levels. That flexibility reduces the risk of dry-running damage as a reservoir or sump level drops.

What is the discharge size and cord length?

The pump has a 1in discharge fitting and ships with a 16ft power cord, giving enough reach for most below-grade or reservoir installations. Confirm the cord length reaches a properly grounded outlet before finalizing your installation plan.

When should I choose this model over the other ECODIVER size?

Compare your required flow and pressure against this 1/2 HP model's 1,560 GPH output at up to 38 PSI to confirm it matches your application before purchasing. Choosing an undersized model can leave you short of pressure during peak demand.