Grow1 2-Way Electric Globe Valve - 3/4-in NPT - 1-26 GPM - 24VAC - Normally Closed

Automated Zone Control With Adjustable Flow - 3/4-in NPT

Watering zones by hand wastes time and leads to uneven feeding. This electric globe valve opens and closes on a 24VAC signal from your timer or controller, so each zone gets water on schedule. It is a normally closed diaphragm valve with a flow control handle, rated for 1-26 GPM and up to 150 psi.

Sold individually, it suits a single grow room, a set of benches, or a larger facility where you add one valve per zone. Order one per zone you plan to automate.

Key Features & Benefits

• Normally closed design — the valve stays shut until it receives a 24VAC signal, so water flows only when you call for it.
• 1-26 GPM flow range — covers small drip zones and larger irrigation blocks.
• Adjustable flow control handle — lets you set maximum flow on site.
• Manual override — lets you open the valve without power during setup or testing.
• 3/4-in NPT threads, vertical or horizontal mounting — fits standard threaded plumbing and gives flexibility in layout.

Who Should Use Grow1 2-Way Electric Globe Valve

Growers who automate irrigation with a 24VAC timer or controller, in hydroponic systems, greenhouses, nurseries or indoor rooms, and who need to switch individual zones on and off.

About Grow1 2-Way Electric Globe Valve

The Grow1 valve is a 2-way globe valve with a diaphragm body and flow control. It has 3/4-in NPT connections, a 24VAC operating voltage, a 150 psi maximum pressure rating and a shipping weight of 0.88 lb.

Frequently Asked Questions

Q: What does normally closed mean?
A: The valve blocks flow when it has no power. It opens only while it receives the 24VAC signal, and closes again when the signal stops.

Q: What voltage does it need?
A: It operates on 24VAC. Use a controller or timer that supplies 24VAC output to each valve.

Q: Can I mount it sideways?
A: Yes. It can be mounted vertically or horizontally.

Q: How do I limit the flow?
A: Use the adjustable flow control handle on the valve to set the maximum flow for the zone. The valve is rated for 1-26 GPM.

Q: What does NPT mean?
A: NPT stands for National Pipe Thread, a tapered thread standard. This valve has 3/4-in NPT connections, so match your fittings to that thread.

Q: Can I open it without power?
A: Yes. The manual override lets you open the valve without an electrical signal.