Danner MDWP30 Ma Drive Water Fall Pump - 3000 GPH
City: US, Tewksbury
- Competitive Price Matching
- Fast & Discreet Shipping (2-3 days)
- Safe & Secure Shopping
- High Quality Trusted Brands
High-Volume Water Circulation for Large Systems - 3000 GPH
Weak circulation leaves reservoirs stagnant and water features trickling instead of flowing. The Danner MDWP30 is a waterfall pump listed at 3000 GPH, so it moves a large volume of water through big reservoirs, return lines and cascading features. The magnetic drive design runs submerged in the water it moves.
This single pump suits growers and gardeners who run a large reservoir, a sizable water feature or a high-volume irrigation loop. Smaller setups with modest flow needs may be better served by a lower-output pump.
Key Features & Benefits
- 3000 GPH listed flow rate — moves large volumes of water for big reservoirs and falls.
- Waterfall pump design — built for lifting water to a height and returning it as a cascade.
- Maximum pumping height of about 14 ft 6 in — gives you room to plan your plumbing rise.
- 20 ft grounded cord — lets you place the pump away from the power source.
- Compact body, about 11 x 7 in — fits into tighter sumps and reservoirs.
Who Should Use Danner MDWP30
Choose this pump if you need strong, steady circulation for a large reservoir, waterfall or high-volume water loop. Check your required flow and lift before you buy.
About Danner MDWP30
The Danner MDWP30 is a magnetic drive waterfall pump, sold each, with a listed flow rate of 3000 GPH and a 20 ft grounded cord. Its MPN is 02660.
Frequently Asked Questions
Q: What flow rate does this pump deliver?
A: It is listed at 3000 GPH. Actual flow falls as lift height and pipe restrictions increase.
Q: How high can it pump water?
A: The maximum pumping height is listed at 14 ft 6 in. Flow drops as you approach that height, so size your plumbing with margin.
Q: How long is the power cord?
A: The cord is 20 ft and grounded. Plug it into a properly protected outlet and keep connections away from standing water.
Q: What does GPH mean?
A: GPH stands for gallons per hour, the volume of water a pump can move in one hour under rated conditions.
Q: What is a magnetic drive pump?
A: A magnetic drive pump turns its impeller with a magnetic coupling rather than a direct shaft seal. This design is common for submersible pumps.
No reviews found
