AquaVita 792 Submersible Water Pump - 792 GPH - 70W

Reliable Reservoir Circulation for Hydroponic Systems - 792 GPH

Hydroponic systems depend on steady water movement, and a pump that clogs or shifts in the reservoir can interrupt feeding. This pump runs submerged or in-line, uses a pre-installed removable foam filter to help protect the impeller from stray particles, and sits on a suction cup base so it stays in place. It is rated 792 GPH at 70W with a maximum lift of 9.84 ft.

This size suits regular indoor growers running a reservoir-fed hydroponic system, and it also works for hobbyists who want a pump with enough flow for a small to mid-size setup. It is sold individually, so you can add one pump per reservoir.

Key Features & Benefits

• Submersible or in-line use — remove the front cover to expose the inlet valve and run the pump outside the tank.
• Removable foam filter — pre-installed to help protect the impeller, and it can be taken out for cleaning.
• Suction cup base — the removable, adjustable base helps keep the pump from sliding or moving.
• Oil-free magnetic rotor — avoids oil in the water path.
• Fittings included — 1/2 in and 3/4 in inlet and outlet fittings suit different tubing setups.

Who Should Use AquaVita 792 Submersible Water Pump

Growers who need to circulate or move nutrient solution in a reservoir, run a hydroponic system, or fill and drain containers will find this pump useful. It also suits aquarium and water-feature use.

About AquaVita 792 Submersible Water Pump

The AquaVita 792 is a 70W submersible and in-line pump rated at 792 gallons per hour with a maximum height of 9.84 ft. It is UL listed and carries a 1 year manufacturer's warranty. It measures 6.5 x 9 x 7 in and ships at 5 lb.

Frequently Asked Questions

Q: Can I use this pump outside the reservoir?
A: Yes. Remove the front cover to expose the inlet valve and the pump can run in-line. Use the included fittings to connect tubing.

Q: What does maximum height mean?
A: Maximum height is the highest point the pump can lift water, and it is 9.84 ft for this model. Flow drops as the lift increases, so the 792 GPH rating applies at low lift.

Q: How do I keep the pump from clogging?
A: Keep the pre-installed foam filter in place, which helps protect the impeller from stray particles. Remove and rinse it periodically so flow stays steady.

Q: Which fittings come with it?
A: It includes 1/2 in and 3/4 in inlet fittings and 1/2 in and 3/4 in outlet fittings.

Q: Is the pump covered by a warranty?
A: Yes, it carries a 1 year manufacturer's warranty and is UL listed.

Q: How do I stop it from moving in the tank?
A: Use the removable, adjustable base with suction cup feet. Press it onto a clean, smooth surface in the reservoir.