AquaVita 528 Submersible Water Pump - 528 GPH - 35 W

Reliable Reservoir Circulation for Hydroponic Systems - 528 GPH

Stagnant nutrient solution and weak flow leave roots short of water and oxygen. This pump circulates solution through a reservoir or an in-line setup, using a 35 W motor with a high magnetic rotor and a ceramic shaft. A pre-installed foam filter keeps stray particles away from the impeller, and the pump lifts water up to 7.55 ft.

This single unit suits small to mid-size indoor hydroponic systems, trial setups and reservoir circulation. Growers who run several reservoirs can add one pump per reservoir.

Key Features & Benefits

• 528 GPH flow rate — moves a steady volume of solution through your system.
• 7.55 ft maximum lift — pushes water up to trays, manifolds or higher reservoirs.
• Submersible or in-line use — remove the front cover to expose the inlet valve and run the pump outside the tank.
• Foam filter and suction cup feet — the removable filter protects the impeller, and the adjustable base resists sliding.
• Included fittings — 1/2 in and 3/4 in inlet and outlet fittings cover common tubing sizes.

Who Should Use AquaVita 528 Submersible Water Pump

Home gardeners and licensed commercial growers who need dependable circulation in hydroponic reservoirs, aquariums or similar water features will find this pump a practical fit.

About AquaVita 528 Submersible Water Pump

The AquaVita 528 is a submersible/in-line water pump rated at 528 GPH and 35 W, with a 7.55 ft maximum height. It is UL listed and carries a 1 year manufacturer's warranty. It measures 4 x 6.5 x 5.5 in and weighs 2.8 lb shipped.

Frequently Asked Questions

Q: Can I use this pump outside the reservoir?
A: Yes. Remove the front cover to expose the inlet valve, and the pump works in-line outside the tank. Use the included fittings to connect your tubing.

Q: Which fittings come with it?
A: The pump includes 1/2 in and 3/4 in inlet fittings and 1/2 in and 3/4 in outlet fittings. This lets you match common tubing sizes.

Q: What does maximum lift height mean?
A: It is the vertical distance the pump can raise water before flow stops. This pump is rated at 7.55 ft. Flow drops as you approach that height, so keep the rise well below it when you need full flow.

Q: How do I keep debris out of the pump?
A: A removable foam filter comes pre-installed and shields the impeller from stray particles. Remove it and rinse it regularly so flow stays steady.

Q: Is the pump certified and covered?
A: It is UL listed and has a 1 year manufacturer's warranty.

Q: How does it stay in place?
A: The removable, adjustable base has suction cup feet that stop the pump from sliding or moving on a smooth surface.