Aqua Master Tools Replacement Peristaltic Pump - 12V - 6 W - 90 ml/min

Restore Accurate Dosing Without Replacing the Unit - 12V

When the pump in a dosing unit wears out, nutrient and pH dosing becomes unreliable and your whole feeding routine suffers. This replacement peristaltic pump lets you swap the worn part instead of the entire unit. It is rated at 6 W and has a listed flow rate of 90 ml per 60 seconds, which varies with liquid temperature and viscosity.

Sold as a single unit, it suits the hobbyist or indoor grower who needs one spare on hand, and the commercial grower who keeps spares for each dosing unit in service.

Key Features & Benefits

• Peristaltic design — the liquid stays inside the tube, so it does not pass through the pump mechanism.
• 12V rated voltage, 6 W power — electrical specifications are clearly stated so you can check them against your unit.
• Listed lifetimes — 800 hours for the motor and 1000 hours for the peristaltic tube, which helps you plan maintenance.
• Wide operating range — works from 5°C to 50°C (41°F to 122°F).
• Quiet operation — noise level is listed below 60 dB.

Who Should Use Aqua Master Tools Replacement Peristaltic Pump

Growers running Aqua Master Tools dosing pump units who need to repair a worn or failed pump, and anyone who wants to keep pH and nutrient dosing running in a hydroponic system.

About Aqua Master Tools Replacement Peristaltic Pump

Aqua Master Tools makes dosing equipment for hydroponic water management. This product is a replacement peristaltic pump for its dosing pump units, rated 12V and 6 W. It is sold each, with GTIN 08721249602153.

Frequently Asked Questions

Q: What is a peristaltic pump?
A: A peristaltic pump moves liquid by squeezing a flexible tube in sequence. The liquid touches only the inside of the tube, which makes dosing consistent and keeps the mechanism clean.

Q: What flow rate should I expect?
A: The listed flow rate is 90 ml per 60 seconds. The actual figure depends on the temperature and viscosity of the liquid being dosed.

Q: How long do the parts last?
A: The listed motor lifetime is 800 hours and the peristaltic tube lifetime is 1000 hours. Actual life depends on how the pump is used.

Q: What temperatures can it handle?
A: The listed operating range is 5°C to 50°C (41°F to 122°F).

Q: Is it loud?
A: The listed noise level is below 60 dB, so it is suited to indoor growing spaces.

Q: Which dosing units does it fit?
A: It is a replacement pump for Aqua Master Tools dosing pump units. Check your unit's model and electrical rating (12V) before ordering.