Plastic Air Divider - 12 Outlet - 7.8 x 0.5 x 2-in

Feed Many Air Lines From One Pump - 12 Outlets

Running a separate pump for every reservoir or air stone adds cost, noise and clutter. This plastic air divider takes the air from one pump and sends it to up to twelve lines, so you can place aeration where it is needed. Its outlets accept 3/8-in inner diameter hose.

At 7.8 in long, 0.5 in wide and 2 in tall, the 12 outlet size suits growers who aerate several containers or sections of a hydroponic system from one air source, from a multi-bucket indoor setup to a larger bench layout.

Key Features & Benefits

• 12 outlets — serve many air lines from a single pump.
• Plastic construction — resists water and is easy to wipe clean.
• 3/8-in inner diameter hose fit — pairs with matching tubing for a snug connection.
• Slim 0.5 in width — fits along a wall, shelf or reservoir rack.

Who Should Use Plastic Air Divider 12 Outlet

Choose this divider if you run several reservoirs, air stones or hydroponic containers from one air pump and want a tidy way to split the supply. It suits home gardeners and commercial growers alike.

About Plastic Air Divider 12 Outlet

This is a plastic air divider with 12 outlets, sold each. It measures 7.8 in long, 0.5 in wide and 2 in high and accepts 3/8-in inner diameter hose. It belongs to the water aeration category for hydroponics.

Frequently Asked Questions

Q: What does an air divider do?
A: It splits the air from one pump into several separate lines. Each outlet connects to its own hose, so one pump can serve many air stones or containers.

Q: What hose size fits?
A: The outlets accept 3/8-in inner diameter hose. Check your tubing before you order so the fit is snug.

Q: Do I need to use all 12 outlets?
A: Using every outlet is not required. Check that your pump delivers enough air for the lines you connect, since more lines share the same output.

Q: How is it better than several small pumps?
A: One pump with a divider means fewer devices to power, place and maintain. Separate pumps give each line independent airflow, which some setups prefer.

Q: How big is it?
A: It measures 7.8 in long, 0.5 in wide and 2 in high. Allow space on a shelf or rack for the hoses to run without kinking.