Aeromixer Tall Tank Nutrient Mixer & Aerator Pump, Over 5 Ft

Reach the Bottom of a Tall Tank Without Climbing or Spilling

A feed tank over five feet tall solves a lot of capacity problems — and creates one of its own: getting an air intake line down to where it actually needs to be usually means a ladder, an awkward reach, or a mess you'd rather not deal with every time you set up to mix.

The Aeromixer Tall Tank fixes that with one change to the standard kit — a 15-foot braided nylon air intake hose, three times the length of the standard 5-foot hose, that reaches the bottom of a tall tank directly. No ladders, no climbing, no spills — just a longer reach built into the kit from the start.

Beyond that hose, it's the same dependable 3/4 HP Aeromixer performance: mixing nutrients and aerating the feeding solution in one pass, easing pH stabilization, and reducing the need for separate air stones, pumps, and correction products — all in a kit sized for organic-only tanks from 50 to 2,000 gallons.

Key Features & Benefits

• 15-foot braided nylon air intake hose — reaches the bottom of tanks over 5 feet tall directly — three times the reach of the standard 5-foot hose, with no ladder required.
• 3/4 HP motor with Aerojet technology — delivers the same mixing-and-aerating performance as the Aeromixer Original, just with the reach a taller tank demands.
• Built for tanks 50-2,000 gallons, over 5 feet tall — matched specifically to the height range where a standard hose comes up short.
• Moves up to 4,450 gallons per hour — keeps larger volumes of solution circulating and aerated even in a tall feed tank.
• Pumps fluids with up to 1/4" solids — handles everyday feeding-solution debris without clogging mid-cycle.
• Complete kit with full hardware — includes the pump, Aerojet fitting, the extended intake hose, stabilized footing, mounting screws, hose adapters, lowering rope, and instructions.

Who Should Use The Aeromixer Tall Tank

This model suits growers running organic feed tanks taller than 5 feet — anyone who's had to climb, reach awkwardly, or improvise a longer hose just to get an intake line to the bottom of a tall tank, and who would rather have that reach built into the kit from day one.

Matching the Hose Length to Your Tank's Height

The defining difference in this kit is its hose — 15 feet versus the standard 5 — so before ordering, measure your tank's actual height from the intake point to the bottom. If your tank stands over 5 feet, this extended-reach kit removes the climbing and mess that come with trying to make a shorter hose work in a space it wasn't built for.

Frequently Asked Questions

How is this different from the Aeromixer Original?

The core pump and performance are the same 3/4 HP Aeromixer system — the Tall Tank kit's defining upgrade is a 15-foot braided air intake hose, three times the length of the standard 5-foot hose, built to reach the bottom of tanks over 5 feet tall.

What size tanks is it built for?

It's designed for organic-only tanks from 50 to 2,000 gallons that stand over 5 feet tall.

Can I use it with a Flexi-Tank?

It's not recommended for Flexi-Tanks or other soft-walled tanks without one of Aeromixer's control units.

Will I still need a ladder to set it up?

No — the extended 15-foot intake hose is specifically designed to reach the bottom of a tall tank directly, removing the need to climb or reach awkwardly during setup.

What's included in the kit?

It includes the 3/4 HP mixing pump, the Aerojet fitting with the extended 15-foot braided air intake hose, a powder-coated stabilizing foot and mounting screws, hose adapters, a nylon lowering rope, and a detailed instruction manual.