Irritrol 2600T Angled Solenoid Valve - 1 in - 24V
City: US, Tewksbury
- Competitive Price Matching
- Fast & Discreet Shipping (2-3 days)
- Safe & Secure Shopping
- High Quality Trusted Brands
Automated Water Control at a 90-Degree Turn - 1 in Angle Valve
Automating a water line is harder when the pipe has to turn in a tight space. The angle body of this valve handles the turn itself, which can save fittings and space. A 24V solenoid lets a compatible controller open and close the line on a schedule. The 2600T is listed by the manufacturer as a 1 in angle valve with an NPT threaded connection.
This is a single valve sold each. It suits a grower adding one zone, replacing a failed valve, or building out a manifold one station at a time, in either a home or a commercial setup.
Key Features & Benefits
- Angle body — routes water through a 90-degree turn without an extra elbow.
- 1 in NPT threaded connection — threads directly onto matching threaded plumbing.
- 24V solenoid — works with controllers that supply 24 volt output.
- Compact housing — the 2600 body is about 6 1/2 in high, 3 in wide and 3 3/4 in long, so it fits in most valve boxes.
Who Should Use Irritrol 2600T
Growers who run irrigation or hydroponic water lines from a 24V controller and need a 1 in valve where the pipe changes direction. It also suits anyone replacing a matching angle valve.
About Irritrol 2600T
The 2600T is part of the Irritrol 2600 angle valve series. The T indicates the NPT threaded connection. The 2600TF variant adds flow control, which this model does not list.
Frequently Asked Questions
Q: What does angle valve mean?
A: An angle valve turns the water path 90 degrees between inlet and outlet. This can remove the need for a separate elbow fitting.
Q: What does NPT mean?
A: NPT stands for National Pipe Taper, a threaded pipe standard. The threads seal as they tighten onto matching fittings.
Q: What is the difference between the 2600T and the 2600TF?
A: Both are 1 in angle valves with NPT threads. The 2600TF adds flow control, while the 2600T does not list it.
Q: What voltage does it need?
A: It uses a 24V solenoid. Pair it with a controller that provides 24 volt output.
Q: Is it a globe valve?
A: No. The 2400 series covers the globe valves, while the 2600 series covers the angle versions.
No reviews found
