Netafim™ High Flow Pressure Regulator - 3/4in - 35 PSI - 4.5-17.6 GPM

Netafim High Flow Pressure Regulator NET30500-001600 -- 3/4in, 35 PSI, 4.5-17.6 GPM

The Netafim High Flow Pressure Regulator maintains a steady 35 PSI outlet pressure across a 4.5-17.6 GPM flow range, giving downstream emitters the pressure stability needed for reliable, uniform performance. This handles the volume demands of mid-to-high flow drip manifolds and sprinkler zones that smaller regulators cannot support. Materials in this 35 PSI High Flow model resist corrosion from fertilizer solutions and chemical additives, and the regulator responds quickly to inlet pressure swings to keep outlet pressure steady through the cycle.

Key Features & Benefits

• Constant 35 PSI Outlet Pressure: The High Flow model stabilizes downstream pressure regardless of inlet pressure variation, protecting emitters and ensuring uniform flow across the zone.
• 4.5-17.6 GPM Flow Range: This handles the volume demands of mid-to-high flow drip manifolds and sprinkler zones that smaller regulators cannot support.
• High Flow Corrosion Resistance: The 35 PSI high flow regulator body withstands fertilizer injections and chemical additives across repeated irrigation seasons without degrading.
• High Flow Pressure Response: The high flow design compensates for inlet pressure fluctuations quickly enough to hold 35 PSI steady through the irrigation cycle.
• 3/4in High Flow Connection: The 3/4in fitting on this high flow model fits standard irrigation mainline and zone valve outlets at 35 PSI for straightforward installation.

Who Should Use This

Commercial growers, greenhouse operators, and irrigation professionals running 3/4in zone lines who need stable 35 PSI outlet pressure protection across a 4.5-17.6 GPM flow range for consistent emitter performance.

Compatibility

3/4in connection. Outlet pressure: 35 PSI. Flow range: 4.5-17.6 GPM. This 35 PSI high flow model is built for drip and sprinkler irrigation systems needing regulated pressure at this size and flow range.

Frequently Asked Questions

How does this differ from the Netafim Low Flow Pressure Regulator?

The High Flow model handles 4.5-17.6 GPM for larger zones, while the Low Flow model handles 0.25-4.4 GPM for small drip and micro-emitter arrays. Both are available at multiple outlet pressures to match different emitter specifications.

Is this regulator suitable for fertigation systems?

Yes. This 35 PSI high flow model's corrosion-resistant materials are built to handle fertilizer solutions and chemical additives in fertigation applications without degrading over its service life.

Can I use this regulator with a sprinkler system?

Yes. This High Flow Pressure Regulator is designed for both drip and sprinkler irrigation systems within its rated 35 PSI and 4.5-17.6 GPM parameters.

What is the maximum inlet pressure rating?

Refer to the Netafim specification sheet for the maximum rated inlet pressure for the 3/4in 35 PSI High Flow model. Inlet limits vary by regulator size and configuration, so confirm the rating before installation.