Netafim 3/4 in Medium Flow Pressure Regulator - 4.5-17.6 GPM

Steady Outlet Pressure for Irrigation Lines - 4.5-17.6 GPM

High inlet pressure can stress fittings, emitters and tubing and cause uneven watering. This regulator reduces incoming pressure to a set outlet pressure, and its rolling diaphragm and sealed regulating chamber keep that output consistent. A built-in indicator shows when proper outlet pressure is achieved, so you can confirm it at a glance.

This 3/4 in unit suits mid-sized irrigation and hydroponic zones that run in the 4.5-17.6 GPM range. Small hobby lines with lower flow need a low flow model. Larger commercial blocks may need a higher flow regulator or several zones, each with its own unit.

Key Features & Benefits

• Rolling diaphragm and sealed regulating chamber — hold outlet pressure consistent.
• High strength ABS body with stainless steel springs — built for long service life where chemicals or aggressive water may be present.
• Female inlet and male outlet — simple assembly into a 3/4 in line.
• Built-in outlet pressure indicator — shows when proper outlet pressure is reached.

Who Should Use Netafim 3/4 in Medium Flow Pressure Regulator

Growers who run irrigation or hydroponic water lines at pressure higher than their emitters, tubing or fittings are meant to take. It fits systems with flow between 4.5 and 17.6 GPM.

About Netafim 3/4 in Medium Flow Pressure Regulator

Netafim makes this 3/4 in medium flow pressure regulator for irrigation systems. It operates on inlet pressure from 30 to 150 PSI, with a maximum operating pressure of 145 psi and a nominal outlet pressure of 35 psi. The body is high strength ABS and the springs are stainless steel. The model number is 32PRV.75-35V2K.

Frequently Asked Questions

Q: What flow range does this regulator cover?
A: It is rated for 4.5 to 17.6 GPM. Flows below that range call for a low flow model, and flows above it call for a larger regulator.

Q: What are the connections?
A: The inlet is a female pipe thread and the outlet is a male pipe thread. The connection size is 3/4 in.

Q: What inlet pressure can it handle?
A: The operating inlet range is 30 to 150 PSI. The listed maximum operating pressure is 145 psi.

Q: How do I know the outlet pressure is correct?
A: The built-in indicator shows when proper outlet pressure is achieved. Nominal outlet pressure for this model is 35 psi.

Q: What is a rolling diaphragm?
A: It is the flexible membrane inside the regulator that moves against the spring to control pressure. Its smooth motion helps keep outlet pressure consistent as inlet pressure changes.

Q: Will it tolerate chemicals in the water?
A: The ABS body and stainless steel springs are described as chemical resistant for use where chemicals or aggressive water may be present. Check your specific solutions against the manufacturer's guidance.