Netafim 17mm TechLock Compression Coupler Fitting - 25 Count

Join Drip Tubing With a Tight Compression Seal - 25 Fittings

Loose or leaking joints waste water and force repairs in the middle of a crop cycle. This coupler uses barbed ends that grip the tubing, plus threaded caps and compression rings that lock the seal. It operates across a 0-100 PSI range, so it suits low-pressure drip lines and higher-pressure runs alike.

One bag holds 25 couplers, which suits a grower building or repairing several drip lines in a single project. Small gardens can keep the extras on hand for future repairs, and larger installations can order additional bags as the layout grows.

Key Features & Benefits

• Barbed ends — grip the polyethylene tubing so the joint resists pulling apart.
• Threaded caps and compression rings — tighten down to form a tight seal without glue or special tools.
• 0-100 PSI operating range — covers a wide span of drip irrigation system pressures.
• Dark brown colour — blends in with dripline and the surrounding area.
• Warranty coverage — 10 years for subsurface installations and 5 years for surface installations.

Who Should Use Netafim TechLock 17mm Compression Coupler Fitting

Use it if you are connecting or repairing 17mm drip tubing in hydroponic systems or other irrigation layouts. It suits growers, contractors and designers who want a repeatable, tool-light connection.

About Netafim TechLock 17mm Compression Coupler Fitting

Netafim makes drip irrigation products, and the TechLock line is its compression fitting range for 17mm tubing. This coupler joins two tubing ends in a straight line. It ships as a bag of 25 pieces and is sold each as one bag.

Frequently Asked Questions

Q: What does this coupler do?
A: It joins two lengths of drip tubing end to end. The barbed ends hold the tubing, and the threaded caps and compression rings seal the connection.

Q: What pressure can it handle?
A: It operates from 0 to 100 PSI. Check your system's regulated pressure before installing.

Q: How many fittings come in an order?
A: One order is a single bag containing 25 couplers.

Q: Is it covered by a warranty?
A: The manufacturer's warranty runs 10 years for subsurface installations and 5 years for surface installations. Confirm the terms with the manufacturer for your installation.

Q: What is a compression fitting?
A: A compression fitting seals by tightening a cap over a ring that squeezes onto the tubing. It needs no adhesive and can usually be undone for repairs.