FloraFlex QDPS Open Flow Bubbler, T, 3/4"

FloraFlex QDPS T Kit: Open Flow Bubbler with 3/4 Inch Fitting

The FloraFlex Quick Disconnect Pipe System (QDPS) Open Flow Bubbler, T bundles three components into one ready-to-install kit: a 3/4 inch T-shaped Flora Pipe Fitting, a Flora Valve Quick Disconnect, and an Open Flow Bubbler. The T fitting lets the assembly branch off a straight supply line while continuing the run in both directions.

Every part of the QDPS system locks together without glue or threading, so the full assembly goes together or comes apart in seconds for maintenance. Once assembled, the Open Flow Bubbler distributes water and nutrients through 8 barbed ports sized for 1/4 inch OD tubing.

Key Features & Benefits

• 3-Piece Kit — Includes a 3/4 inch T-shaped fitting, Quick Disconnect, and Open Flow Bubbler in one assembly.
• 3/4 Inch T Fitting — Branches a feed line off a straight run while continuing supply in both directions.
• No Glue or Threading — All QDPS parts connect and separate without tools, glue, or tape.
• 8-Outlet Bubbler — The included Open Flow Bubbler distributes to up to eight feed lines.
• Fast Assembly — The complete kit assembles in seconds for quick installation or swaps.
• Quick-Release Maintenance — Disconnect any component individually for cleaning without rebuilding the whole assembly.

Who Should Use the T QDPS Kit

This kit suits growers branching a new manifold off an existing straight supply line, such as adding a row of plants mid-run, while keeping the full-pressure distribution of an Open Flow Bubbler.

Assembling the QDPS T Kit

Press the T-shaped Flora Pipe Fitting onto the supply line at the branch point, snap the Flora Valve Quick Disconnect onto the T fitting, then attach the Open Flow Bubbler to the disconnect. Each connection is push-fit, so no glue, tape, or threading tools are needed.

Frequently Asked Questions

What three parts are included in this kit?

A 3/4 inch T-shaped Flora Pipe Fitting, a Flora Valve Quick Disconnect, and an Open Flow Bubbler.

What size is the T fitting?

It is sized at 3/4 inch.

Do I need glue or tape to assemble this kit?

No, all QDPS parts connect without glue, tape, or threading.

How many outlets does the included bubbler have?

The Open Flow Bubbler has 8 outlets.

When would I use a T fitting instead of an elbow?

Use the T fitting to branch a feed line off a straight run while continuing supply in both directions; use the elbow to turn a corner.