FloraFlex QDPS Multi Flow Bubbler, T, 3/4"

Ready-to-Install Multi Flow Bubbler Kit with 3/4in T Fitting

Building a bubbler manifold from separate pipe fittings, disconnects, and bubblers means sourcing and sizing three parts correctly before anything gets installed. The FloraFlex Quick Disconnect Pipe System (QDPS) Multi Flow Bubbler, T bundles a 3/4 inch T-shaped Flora Pipe Fitting, a Flora Valve Quick Disconnect, and a Multi Flow Bubbler into one ready-to-install kit, letting the assembly branch off a straight supply line while continuing the run in both directions.

Every part of the QDPS system locks together without glue or threading, so the full assembly goes together or comes apart in seconds for maintenance. Once assembled, the Multi Flow Bubbler distributes water and nutrients through 8 barbed ports sized for 1/4 inch OD tubing, with 4 color-coded inserts (2, 6, 10, and 20 GPH) so each outlet can be tuned to a different flow rate.

Key Features & Benefits

• 3-piece kit — includes a 3/4 inch t fitting, Quick Disconnect, and Multi Flow Bubbler in one assembly.
• 3/4 inch T fitting — Letting the assembly branch off a straight supply line while continuing the run in both directions.
• No glue or threading — all QDPS parts connect and separate without tools, glue, or tape.
• 4 interchangeable inserts — color-coded inserts at 2, 6, 10, and 20 GPH for per-outlet flow control.
• 8-outlet bubbler — the included Multi Flow Bubbler distributes to up to eight feed lines.
• Fast assembly — the complete kit assembles in seconds for quick installation or swaps.

Who Should Use the T Multi Flow Kit

This kit suits growers setting up a manifold where the feed line needs to branch off an existing straight supply line, such as adding a row of plants mid-run, while getting the per-outlet flow control of a Multi Flow Bubbler.

About the FloraFlex QDPS System

FloraFlex designs its Quick Disconnect Pipe System components to snap together without glue or threading across its full catalog of fittings and bubblers, so growers can build or reconfigure a manifold without specialized plumbing tools.

Frequently Asked Questions

What three parts are included in this kit?

This kit includes a 3/4 inch T-shaped Flora Pipe Fitting, a Flora Valve Quick Disconnect, and a Multi Flow Bubbler. All three are sized to connect without additional adapters.

What size is the t fitting?

It's sized at 3/4 inch, matching FloraFlex's standard pipe fitting size. That sizing carries through the rest of the assembly to the Quick Disconnect and bubbler.

Do I need glue or tape to assemble this kit?

No, all QDPS parts connect without glue, tape, or threading. Each connection is push-fit, so the kit assembles or comes apart with hand pressure alone.

How many outlets does the included bubbler have?

The Multi Flow Bubbler has 8 outlets, fed from the single 1/2 inch inlet on the kit. Each of those outlets can take a different color-coded insert to set its own flow rate.

How do I assemble the QDPS T kit?

Press the T-shaped Flora Pipe Fitting onto the supply line, snap the Flora Valve Quick Disconnect onto it, then attach the Multi Flow Bubbler to the disconnect. Each connection is push-fit, so no glue, tape, or threading tools are needed during assembly or later disassembly.

Can I disconnect just one part for cleaning?

Yes, each component in the QDPS system can be disconnected individually. That means a grower can pull just the bubbler for cleaning without breaking down the fitting or disconnect.