FloraFlex Multi Flow Bubbler

FloraFlex Multi Flow Bubbler: 8-Outlet Manifold with Adjustable Inserts

The FloraFlex Multi Flow Bubbler is an 8-outlet manifold that delivers water and nutrients to multiple plants from a single feed line, with the flow rate set by the insert installed in each outlet. It ships with 4 color-coded interchangeable inserts rated at 2 GPH (yellow), 6 GPH (black), 10 GPH (red), and 20 GPH (blue), letting growers fine-tune output per zone.

Like the Open Flow Bubbler, the Multi Flow Bubbler's 1/2 inch inlet screws into a FloraFlex Quick Disconnect without threading, and each of its eight barbed ports connects to 1/4 inch OD tubing. The rubber grip top and ABS construction make it durable for daily use in an irrigation manifold.

Key Features & Benefits

• 8-Outlet Manifold — Distributes water and nutrients to up to eight feed lines from one source.
• 4 Interchangeable Inserts — Color-coded inserts at 2, 6, 10, and 20 GPH let you set flow per outlet.
• Color-Coded Flow Rates — Yellow (2 GPH), black (6 GPH), red (10 GPH), and blue (20 GPH) inserts for quick identification.
• Quick Disconnect Compatible — 1/2 inch inlet screws into the FloraFlex Quick Disconnect without threading.
• 8 Barbed Ports — Each port connects directly to 1/4 inch OD tubing.
• Rubber Grip Top — Textured top makes the bubbler easy to grip during setup or service.
• ABS Construction — Durable ABS plastic body withstands continuous irrigation use.

Who Should Use the Multi Flow Bubbler

Growers who need different flow rates across zones, such as larger or smaller plants sharing a feed line, benefit from the Multi Flow Bubbler's interchangeable inserts. It is a practical upgrade from the Open Flow Bubbler whenever per-outlet flow control matters.

Choosing and Swapping Flow Inserts

Select the insert color that matches the flow rate needed for each outlet: yellow for 2 GPH, black for 6 GPH, red for 10 GPH, or blue for 20 GPH. Inserts can be swapped at any outlet to rebalance flow as plant size or zone needs change.

Frequently Asked Questions

What flow rates do the inserts provide?

The four inserts are rated at 2, 6, 10, and 20 GPH.

How are the inserts identified?

By color: yellow for 2 GPH, black for 6 GPH, red for 10 GPH, and blue for 20 GPH.

Can I use different flow rates on different outlets?

Yes, each of the 8 outlets can take a different insert to vary flow rate by zone.

How does the bubbler connect to the valve line?

Its 1/2 inch inlet screws into a FloraFlex Quick Disconnect without threading.

What size tubing connects to the outlets?

Each of the 8 barbed ports connects to 1/4 inch OD tubing.