Dosatron® Dosa Klean Injector Cleanser — 0.187 lb Packets

Dissolve Mineral Scale From a Dosatron Injector Without Disassembly

Mineral scale, iron deposits, and calcification inside a Dosatron injector gradually degrade proportioning accuracy and restrict water flow, which shows up as inconsistent fertilizer delivery and uneven crop nutrition. Dosatron® Dosa Klean Cleanser is formulated specifically for Dosatron injectors, dissolving rust, mineral deposits, and calcium buildup to restore internal components to peak operating condition.

The soak protocol requires no disassembly: add one packet to one gallon of water per injector and soak for 24 to 48 hours. For larger injector models, two packets in two gallons of water covers the internal proportioning mechanism thoroughly.

Key Features & Benefits

• Targeted injector formula — engineered for Dosatron injector internals, removing mineral scale without damaging plastic or rubber components.
• Removes rust and calcification — dissolves iron deposits and calcium carbonate buildup that degrade flow accuracy over time.
• Simple soak protocol — no disassembly required; add the packet to water, insert the injector, and soak 24-48 hours.
• Scalable for large injectors — use two packets in two gallons of water for larger-volume models.
• Preventive maintenance — regular use as part of a scheduled routine prevents performance degradation before it starts.

Who Should Use This

Any grower or facility manager running Dosatron fertilizer injectors should keep Dosa Klean on hand, especially in hard-water areas where mineral scale builds up fast and injector accuracy is critical to maintaining precise nutrient concentrations.

About Dosatron

Dosatron International has manufactured water-powered dosing equipment since 1974, headquartered in Tresses, France with a North American base in Clearwater, Florida serving growers for more than 30 years. Dosa Klean is Dosatron's own maintenance formula, developed specifically for the mineral-scale challenges its injectors face in the field.

Frequently Asked Questions

How often should I use Dosa Klean on my injectors?

Dosatron recommends regular use as part of scheduled injector maintenance. Frequency depends on water hardness and usage; monthly is a common starting point in hard-water areas.

Do I need to disassemble the injector to use Dosa Klean?

No — the soak protocol works with the injector intact. Place the injector in the cleaning solution and let it soak for 24 hours, up to 48 for heavy buildup.

Is Dosa Klean safe for every Dosatron model?

Yes — the formula is designed for Dosatron injector materials across the model range. Always follow the product instructions and Dosatron's maintenance guidelines for the specific model being cleaned.

Can I use Dosa Klean before mineral buildup becomes a problem?

Yes — regular scheduled use helps prevent mineral buildup from reaching levels that affect performance. That makes it both a corrective and a preventive maintenance product.