HydroLogic HyperLogic Pre-Treatment Chemical Injection System - 15gal Tank - 220V

Reliable Pre-Treatment Chemical Injection for Commercial and Industrial RO Systems

The HydroLogic HyperLogic Chemical Injection System provides precise pre-treatment chemical dosing for commercial, industrial, and heavy-industrial reverse osmosis systems. The 220V single-phase adjustable peristaltic pump delivers 0.0 to 3.0 GPD of anti-scalant, acid, or chlorine injection, while the 15-gallon tank and low-level float shut-off switch help ensure safe, continuous operation without chemical dry-run risk.

Key Features & Benefits

• 0.0 to 3.0 GPD Adjustable Peristaltic Pump: Fine-tune the chemical injection rate to match RO system capacity and water chemistry requirements.
• 15-Gallon Chemical Tank: Provides extended between-fill intervals for reduced maintenance frequency in continuous-run systems.
• Low-Level Float Shut-Off Switch: Automatically stops the pump when the tank runs low, helping prevent chemical dry-run damage to the pump and RO membrane.
• 220V Single-Phase Operation: Designed for commercial and industrial electrical infrastructure (0.9A, 60 Hz).
• For Anti-Scalant, Acid, and Chlorine Injection: Covers the three primary RO pre-treatment chemical categories.

Who Should Use This

Facility managers, water treatment technicians, and greenhouse operators running HydroLogic HyperLogic commercial, industrial, or heavy-industrial RO systems who need reliable, automated pre-treatment chemical injection to protect membranes and maintain water quality.

Compatibility

Designed for use with HydroLogic HyperLogic Commercial, Industrial, and Heavy-Industrial Series RO systems. Suitable for anti-scalant, acid injection, and chlorine dosing. Operates on 220V single-phase 60 Hz (0.9A). Formerly listed as HyperLogic part 11716.

Frequently Asked Questions

What chemicals can be injected with this system?

This system is commonly used for anti-scalant, acid, and chlorine pre-treatment injection ahead of RO membranes. Match the chemical category to your water chemistry and pre-treatment goals.

How do I adjust the injection rate?

Set the adjustable peristaltic pump anywhere between 0.0 and 3.0 GPD to match your RO system's flow rate and water chemistry requirements. Recalibrate the rate whenever your source water quality or system capacity changes.

What does the float shut-off switch do?

The low-level float switch automatically stops the pump when the tank is nearly empty, preventing dry-run damage to the peristaltic pump. This also protects the RO system from receiving unmetered, undosed water.

Is this compatible with all HydroLogic RO systems?

This system is designed for HydroLogic HyperLogic Commercial, Industrial, and Heavy-Industrial Series RO systems. Confirm compatibility with your specific RO model before ordering.