Dosatron Water Powered Doser 14 GPM 1:100 to 1:10, 3/4 in

Dosatron D14MZ10 14 GPM Water-Powered Doser, 1:100-1:10 – D14MZ10VFBPHY

The Dosatron D14MZ10VFBPHY is the high-concentration configuration of the D14 series, covering a dilution range of 1:100 to 1:10 (1% to 10%). This range — 1.28 to 12.8 oz of concentrate per gallon of water — is used for products that require higher application rates: concentrated pH adjusters used at full or near-full strength, certain root treatment solutions, concentrated disinfectants, or specialty products with high per-gallon dose recommendations.

Like all D14 series Dosatron injectors, the D14MZ10VFBPHY is water-powered, requires no electricity, and uses a 3/4-inch NPT connection. Viton (FKM) seals provide chemical compatibility with a wide range of concentrates. The bypass allows plain-water flow without removing the injector, and the included union enables clean inline installation and future service access.

Key Features & Benefits

• 1:100 to 1:10 Dilution Range — 1% to 10% concentration — for products dosed at higher rates than standard nutrient solutions.
• 1.28 to 12.8 oz per Gallon — Application rate in common US imperial units.
• Viton Seal Assembly — Compatible with most nutrients, pH adjusters, and specialty additives.
• 3/4-Inch NPT Connection — Standard Lo-Flo NDS and grow room irrigation connection.
• 0.05-14 GPM Flow Range — Handles standard flow rates at 7 to 85 PSI.
• Bypass and Union Included — For plain-water flow and clean inline installation.
• Water-Powered — No electricity required.

Who Should Use This Injector

The D14MZ10VFBPHY is for applications requiring injection at 1% to 10% concentration — most commonly concentrated pH adjusters, disinfectants, or specialty treatments. For standard nutrient programs where dosing is below 1% (1:100), the D14MZ2 (0.2-2%) or D14MZ3000 (0.03-0.3%) series provides more precise control at the lower concentrations.

Dosatron Dilution Range vs. Application Accuracy

Each Dosatron model is calibrated to inject accurately within its rated dilution range. Operating a Dosatron at the extremes of its range — or outside it — produces less accurate dosing. The D14MZ10 covers 1:100 to 1:10, which means it is most accurate in that range and not appropriate for nutrient solutions dosed at 1:200 or lower. Conversely, using a D14MZ3000 (rated to 1:333 maximum) for a product that requires 1:100 would mean operating outside the injector's rated range. Always select the Dosatron model whose dilution range encompasses the concentrate's recommended application rate.

Frequently Asked Questions

What is the dilution range of the D14MZ10VFBPHY?

1:100 to 1:10 (1% to 10%), or 1.28 to 12.8 oz of concentrate per gallon.

When should I use the D14MZ10 instead of the D14MZ2?

The D14MZ10 is for concentrates applied at 1% to 10%. The D14MZ2 covers 0.2% to 2%. For products dosed between 1% and 2%, either model overlaps — choose based on the exact recommended rate and desired precision.

What connection size does it use?

3/4-inch NPT.

Is electricity required?

No.

What is included?

Mounting bracket, suction hose, bypass, union, and weighted strainer.