Dilution Solutions Nutrient Delivery System (NDS) End Kit, 1 1/2 in

NDS End Kit, No Monitor – 1-1/2 Inch Hi-Flo Systems (HYKEND150)

The Dilution Solutions HYKEND150 is the End Kit option for 1-1/2-inch Hi-Flo Nutrient Delivery System installations. It provides the components needed to complete the outlet side of the NDS without including the inline EC/pH/temperature monitor. The End Kit is used by growers who prefer to manage nutrient solution monitoring separately from the NDS plumbing, or who will add monitoring at a later stage.

To build a complete Hi-Flo NDS using the HYKEND150, additional components are required: Dosatron Injectors, the Standard Starter Kit (inlet side), Mixing Chamber Kit(s), and the Water Hammer Arrestor Kit. The No-Monitor Kit (DSMPK1.5) is an alternative that includes all components from the Monitor Kit except the monitor itself.

Key Features & Benefits

• 1-1/2-Inch Hi-Flo System — Sized for 1-1/2-inch NDS installations for higher flow rate applications.
• No-Monitor Configuration — Completes the NDS without an inline EC/pH/temperature monitor.
• Alternative to Monitor Kit — Use when inline monitoring is not required or will be added separately.
• System Component — Works as part of a complete Hi-Flo NDS build alongside Starter Kit, Mixing Chamber Kit, and Water Hammer Arrestor Kit.
• Dosatron Compatible — Designed for use in Dilution Solutions NDS installations using Dosatron proportional injectors.
• Assembly Required — Field assembly of plumbing components is required during installation.

Who Should Use This Kit

The HYKEND150 End Kit is for growers building or completing a 1-1/2-inch Hi-Flo NDS who do not require — or who are deferring — inline nutrient monitoring. It is also appropriate for operations that already have a monitoring solution integrated separately from the NDS plumbing.

End Kit vs. No-Monitor Kit vs. Monitor Kit

Dilution Solutions offers three options for completing the outlet-side of an NDS: the Monitor Kit (includes inline EC/pH/temperature monitor and all plumbing), the No-Monitor Kit (same as Monitor Kit but without the monitor), and the End Kit (a simpler, more minimal alternative to the No-Monitor Kit). The End Kit is the lowest-cost option for operators who need to close out the NDS outlet without a monitor. The No-Monitor Kit includes additional plumbing fittings compared to the End Kit and provides more upgrade flexibility.

Frequently Asked Questions

What is included in the HYKEND150?

The HYKEND150 is the NDS End Kit for 1-1/2-inch systems without an inline monitor. It provides the components needed to complete the outlet side of the NDS. Contact Dilution Solutions for a full components list.

What else do I need to complete the Hi-Flo NDS?

In addition to the HYKEND150, you will need Dosatron Injectors, the Standard Starter Kit (inlet side), Mixing Chamber Kit(s), and the Water Hammer Arrestor Kit. Those pieces cover the full inlet through outlet path of a Hi-Flo system.

What is the difference between the End Kit and No-Monitor Kit?

The End Kit is a simpler, more minimal option for completing the NDS outlet without a monitor. The No-Monitor Kit includes more plumbing components and is a direct substitute for the Monitor Kit minus the monitor.

When should I choose the No-Monitor Kit over the End Kit?

Choose the No-Monitor Kit (DSMPK1.5) over this End Kit when you want the extra plumbing fittings that make a later monitor upgrade easier. If you're confident you won't add inline monitoring, this simpler End Kit is the lower-cost choice.

Is assembly required?

Yes, assembly of plumbing components is required during installation. The kit ships as loose fittings and hardware rather than a pre-assembled unit.