Dilution Solutions (NDS) Micro-Doser System, 3/4 in Right to Left (Lo-Flo)

eOne MF Proportional Micro-Doser NDS Kit, 3/4 Inch, Right-to-Left

The Dilution Solutions eOne MF Micro-Doser NDS Kit (PE0110MF.75INX1PR-RL) is the right-to-left orientation of the 3/4-inch eOne MF proportional dosing pump system. The right-to-left orientation has water entering from the right and exiting to the left — the mirror configuration of the PE0110MF.75INX1PR-LR. Select the orientation that matches the physical flow direction in the installation location.

All specifications are identical to the LTR version: the eOne MF microprocessor-controlled peristaltic pump operates at up to 180 impulses per minute, 0.26 gph flow rate, and a maximum operating pressure of 1.45 psi. The backlit graphic display allows programming of dosing parameters. The complete kit includes the eOne MF 0110 pump, polyethylene panel, PVC suction and discharge tubing, polyethylene discharge tube, water meter, check valve, pressure relief valve, injection valve, unions, foot filter, and mixing chamber.

Key Features & Benefits

• Microprocessor Proportional Dosing — Programmable peristaltic pump for precise and consistent concentrate delivery.
• 3/4-Inch Right-to-Left — Panel flow direction for right-to-left plumbing installations.
• 180 Impulses per Minute — High-frequency dosing capability for precise and consistent concentrate delivery.
• 0.26 GPH Flow Rate — Precise low-flow dosing independent of the main water flow rate.
• Backlit Graphic Display — Clear programming interface for setting dosing parameters.
• Complete Kit — Includes pump, PE panel, suction/discharge tubing, water meter, check valve, foot filter, mixing chamber, and all connections.

Who Should Use This Kit

The RTL orientation of the eOne MF kit is for installations where the water supply enters from the right side of the panel. When planning installation layout, confirm the water flow direction at the panel location before selecting LTR or RTL.

Selecting the Correct Orientation

The left-to-right and right-to-left designations refer to the direction water flows through the eOne MF panel — not the direction the panel faces. In an LTR configuration, the water inlet is on the left and the outlet is on the right. In the RTL configuration, the water inlet is on the right and the outlet is on the left. The pump and dosing mechanisms are identical in both versions. Select the orientation that allows the inlet and outlet plumbing to connect cleanly without requiring 180-degree bends or cross-routing of water lines.

Frequently Asked Questions

What is the difference between RTL and LTR?

The RTL (right-to-left) and LTR (left-to-right) kits are mirror images of each other, with water entering from opposite sides. Select the orientation that matches your plumbing direction to avoid awkward bends at installation.

What is included in the kit?

The kit includes the eOne MF 0110 pump, polyethylene panel, PVC suction tube, PVC priming discharge tube, PE discharge tube, water meter, check valve, pressure relief valve, injection valve, unions, foot filter, and mixing chamber. That's the complete set of hardware needed for a single inline installation.

Are the pump specifications the same as the LTR version?

Yes, both LTR and RTL kits use the same eOne MF pump with the same flow rate (0.26 gph), max pressure (1.45 psi), and programming capabilities. Only the panel orientation differs between the two kits.

What size system is this for?

The PE0110MF.75INX1PR-RL is for 3/4-inch Lo-Flo NDS installations. For 1-1/2-inch Hi-Flo systems, use the DSETA1.5RTL version instead.

How do I know which orientation my installation needs?

Check which side the water supply pipe approaches the panel location from and match the kit accordingly — choose RTL when supply comes from the right. Getting the orientation wrong at order time means cross-routing water lines or awkward 180-degree bends during installation.