Dilution Solutions Nutrient Delivery System (NDS) Micro-Doser Kit, 1 1/2 in Left to Right (Hi-Flo)

eOne MF Proportional Micro-Doser NDS Kit, 1-1/2 Inch, Left-to-Right

The Dilution Solutions eOne MF Micro-Doser NDS Kit (PE0110MF1.5INX1PR-LR) is the 1-1/2-inch Hi-Flo version of the eOne MF proportional dosing pump system in left-to-right orientation. It provides the same microprocessor-controlled peristaltic pump dosing capability as the 3/4-inch version, mounted on a 1-1/2-inch Hi-Flo NDS panel for higher-flow-rate installations.

The eOne MF pump operates at up to 180 impulses per minute with a flow rate of 0.26 gph and a maximum operating pressure of 1.45 psi. The backlit graphic display allows programming of dosing parameters. The 1-1/2-inch panel size accommodates the higher water flow rates of Hi-Flo NDS systems while maintaining the same precise dosing capability of the eOne MF pump. The complete kit includes the eOne MF 0110 pump, polyethylene panel, PVC suction and discharge tubing, polyethylene discharge tube, water meter, check valve, pressure relief valve, injection valve, unions, foot filter, and mixing chamber.

Key Features & Benefits

• 1-1/2-Inch Hi-Flo System — Panel sized for 1-1/2-inch Hi-Flo NDS installations.
• Left-to-Right Orientation — Water enters from the left and exits to the right.
• Microprocessor Proportional Dosing — Programmable peristaltic pump for precise concentrate delivery.
• 180 Impulses per Minute — High-frequency dosing capability for consistent delivery.
• 0.26 GPH Pump Flow Rate — Precise low-flow dosing independent of the main water flow rate.
• Complete Kit — Includes pump, PE panel, suction/discharge tubing, water meter, check valve, foot filter, mixing chamber, and all connections.

Who Should Use This Kit

The 1-1/2-inch LTR eOne MF kit is for Hi-Flo NDS installations where left-to-right water flow direction is required and programmable peristaltic dosing is preferred over flow-proportional Dosatron injection. It is appropriate for larger facilities where higher flow rates make 3/4-inch NDS components a restriction.

When to Choose Hi-Flo vs. Lo-Flo NDS

The primary factor in choosing Hi-Flo (1-1/2-inch) vs. Lo-Flo (3/4-inch) NDS is the water supply flow rate at the installation location. If the flow rate required to adequately irrigate the facility exceeds what the 3/4-inch components can pass without creating excessive pressure drop, Hi-Flo 1-1/2-inch components are the appropriate choice. Dilution Solutions provides flow rate specifications for both system sizes — confirm that the facility's peak flow demand is within the rated range before selecting a system size.

Frequently Asked Questions

What size system is this kit for?

The PE0110MF1.5INX1PR-LR is for 1-1/2-inch Hi-Flo NDS installations.

What is the flow orientation?

LTR — water enters from the left and exits to the right of the panel.

Is the pump different from the 3/4-inch version?

No. The same eOne MF 0110 pump is used in both 3/4-inch and 1-1/2-inch kits. The panel size and connections differ.

What is included in the kit?

The kit includes the eOne MF 0110 pump, polyethylene panel, PVC suction tube, PVC priming discharge tube, PE discharge tube, water meter, check valve, pressure relief valve, injection valve, unions, foot filter, and mixing chamber.

When is Hi-Flo preferred over Lo-Flo?

When the facility's irrigation flow rate exceeds the capacity of 3/4-inch components, the 1-1/2-inch Hi-Flo NDS is needed to avoid excessive pressure drop.