Iponic Extension Cable for Sensor - 50 ft

Extra Reach for Sensor Placement - 50 ft

Sensors often need to sit far from the controller that reads them, and a short factory lead limits where you can mount either one. This extension cable adds length to the iPonic Digital Integrated Sensor Module connection, so you can position the sensor where it measures best and keep the controller in a convenient spot.

This single 50 ft cable suits growers with a larger room, a remote reservoir, or a layout where the controller and hydroponic system sit apart. Order one per sensor you need to extend.

Key Features & Benefits

• 50 ft length — gives you flexibility in placing the sensor away from the controller.
• Made for the iPonic Digital Integrated Sensor Module — pairs with the sensor module it is designed for.
• Compact packaging — ships at 0.8 lb, so it is easy to handle and store.
• Sold each — buy only the number of cables your setup needs.

Who Should Use Iponic Extension Cable for Sensor

Use it if you run an iPonic Digital Integrated Sensor Module and the standard cable does not reach your preferred mounting location. It suits home gardeners and commercial growers with larger indoor cultivation spaces.

About Iponic Extension Cable for Sensor

Iponic makes meters and controllers for hydroponic cultivation. This extension cable is a compatible accessory for the iPonic Digital Integrated Sensor Module. It is sold as a single cable and measures about 8 x 6 x 1 in as packaged.

Frequently Asked Questions

Q: What does this cable work with?
A: It is an extension cable for the iPonic Digital Integrated Sensor Module. Check that your setup uses that module before ordering.

Q: How long is the cable?
A: The cable is 50 ft long. That length lets you separate the sensor and controller by a wide distance.

Q: How many cables come in an order?
A: Each order contains one cable. If you need to extend more than one sensor, order one for each.

Q: Why would I extend a sensor cable?
A: A longer cable lets you put the sensor in the best spot for an accurate reading without moving the controller. This helps in larger rooms or with remote reservoirs.

Q: What is an extension cable?
A: It is a lead that connects between a device and its original cable to add length. It carries the same signal over a longer run.