Aqua Master Tools E50 Pro EC Electrode - Replacement - 3.6 x 1.2 x 1.2-in

Replacement Electrode for Your E50 Pro Meter - Compact Probe

A worn or damaged electrode makes nutrient readings unreliable, and replacing the whole meter is costly. This replaceable electrode fits the E50 Pro EC temp meter, so you swap only the part that wore out. Once attached, the meter is IP67 waterproof, according to the distributor.

Sold as a single electrode, it suits home growers keeping one meter running and commercial teams stocking a spare for each handheld meter on the floor.

Key Features & Benefits

• Replaceable design — renew the sensing part without buying a new meter.
• Made for the E50 Pro EC temp meter — it is listed as suitable for that meter.
• IP67 waterproof when attached — the meter stays protected in wet growing areas.
• Compact size — 3.6 in long and 1.2 in wide and high, easy to store as a spare.
• Manual and video guidance — the user manual and a how-to video cover replacement.

Who Should Use Aqua Master Tools E50 Pro EC Electrode

Use it if you own an E50 Pro EC temp meter and its readings have become unreliable or the electrode is damaged. It suits hydroponic growers who test nutrient solution regularly.

About Aqua Master Tools E50 Pro EC Electrode

This is a replacement electrode for the E50 Pro EC temp meter, sold each. It measures 3.6 x 1.2 x 1.2 in. The distributor states that the electrode is IP67 waterproof when attached to the meter.

Frequently Asked Questions

Q: Which meter does this electrode fit?
A: It is listed as suitable for the E50 Pro EC temp meter. Do not assume it fits other meters.

Q: How do I replace the electrode?
A: Unscrew the sealing ring at the lower part of the meter and gently pull out the old electrode. Seat the new one with its recess in the correct position so the connectors meet. Check the rubber seal and tighten the sealing ring firmly.

Q: Do I need to calibrate after fitting it?
A: Yes. Calibrate the meter as described in the user manual before using it.

Q: Is the meter still waterproof?
A: The electrode is IP67 waterproof when attached to the meter. Make sure the rubber seal sits correctly and the sealing ring is tight.

Q: What does IP67 mean?
A: IP67 is an ingress protection rating for resistance to dust and temporary immersion in water. It applies here once the electrode is attached to the meter.