Bluelab pH Probe KCl Storage Solution – 120 mL

Bluelab pH Probe KCl Storage Solution – 120 mL

Bluelab pH Probe KCl Storage Solution is a potassium chloride solution designed to hydrate and store Bluelab pH pens and probes. It keeps the probe tip moist between uses, helping support accurate pH readings and protect against damage caused by drying out.

This 120 mL bottle is an essential maintenance supply for growers testing hydroponic nutrient solutions, irrigation water, soil, and growing media. Use it for probe storage and routine hydration alongside regular cleaning and calibration.

Key Features and Benefits

• Designed for pH probe care: Formulated specifically for storing and hydrating Bluelab pH pens and probes.
• Supports accurate measurements: Proper hydration helps maintain reliable pH readings.
• Helps protect probe life: Keeps the sensitive probe tip moist to help prevent drying damage.
• Bluelab compatibility: Suitable for Bluelab pH pens, soil pH pens, pH probes, and soil pH probes.
• 120 mL bottle: Contains approximately 4.06 fluid ounces.

Frequently Asked Questions About Bluelab KCl Storage Solution

What is Bluelab pH Probe KCl Storage Solution used for?

Bluelab pH Probe KCl Storage Solution is used to hydrate and store Bluelab pH pens and probes. It keeps the glass sensor and reference junction hydrated, supporting reliable measurements between uses.

What does KCl mean in pH probe storage solution?

KCl stands for potassium chloride. Bluelab’s potassium chloride solution provides suitable conditions for storing and hydrating its pH electrodes.

How do you hydrate a Bluelab pH probe with KCl solution?

Clean the probe, then place it upright in a small plastic container with enough Bluelab KCl Storage Solution to submerge the probe tip. Soak for 24 hours, rinse the tip with fresh tap water, discard the used solution, and calibrate according to your instrument’s instructions.

How often should you hydrate a Bluelab pH pen or probe?

Bluelab recommends cleaning, hydrating, and calibrating its pH pens and probes before first use and monthly. Keep the probe tip moist between uses and replenish the storage cap according to your model’s instructions.

Can you store a Bluelab pH probe in distilled or RO water?

No. Never use distilled, deionized, or reverse osmosis water to store or hydrate a Bluelab pH probe. These types of water can damage the probe. Use Bluelab KCl Storage Solution instead.

Is KCl storage solution the same as pH calibration solution?

No. KCl storage solution maintains probe hydration, while pH calibration solutions establish measurement accuracy. Use the separate pH buffer solutions specified in your instrument’s calibration instructions.

Can Bluelab KCl Storage Solution restore a dried-out pH probe?

A dried-out Bluelab pH probe may recover after soaking in KCl Storage Solution for 24 hours and recalibrating. Recovery is not guaranteed because drying can permanently damage the probe.

Which pH pens and probes can use Bluelab KCl Storage Solution?

Bluelab KCl Storage Solution is suitable for Bluelab pH pens, soil pH pens, pH probes, and soil pH probes. For another brand, verify the required storage solution and concentration with the instrument manufacturer.