Aqua Master Tools C800 Pro pH/EC Inline Controller - 6 Bar Inline Electrodes - 3/4-in Saddle Clamp

Automatic pH and EC Control for Pressurized Lines - 6 Bar Inline Version

Manual checks and adjustments let nutrient solutions drift between visits. This controller measures pH, EC, PPM, TDS and temperature continuously and doses the amounts you set when readings leave your target range. Its inline electrodes are rated up to 6 bar, so they suit pressurized pipelines.

This single unit suits growers who run a batch tank on an irrigation or hydroponic system and want electrodes installed in the line. Because it controls one pH pump and one to five EC pumps, it scales from a simple setup to a multi-nutrient one. Dosing pumps are sold separately.

Key Features & Benefits

• Inline electrodes rated up to 6 bar — install in pressurized pipelines using 3/4-in saddle clamps.
• Two separate UTP output ports — connect one pH pump and one to five EC pumps.
• Flexible operating modes — run it as a combined pH and EC controller, or as a standalone pH or EC controller.
• Color touchscreen — view real-time values, alarm status and historical data on the unit.
• App connection — the free Aqua Master Tools app (iOS/Android) provides alarm notifications and remote adjustment of settings.

Who Should Use the C800 Pro Inline Controller

Growers managing nutrient solution in a batch tank on hydroponic or irrigation systems, from serious home gardeners to commercial operations, who need automated regulation on a pressurized line.

About Aqua Master Tools C800 Pro Inline

The Aqua Master Tools C800 Pro Inline 6 Bar is a pH and EC controller for horticulture and professional cultivation systems. The box includes the controller, an inline pH electrode, an inline EC electrode with built-in temperature sensor, an international power adapter and a user manual. Both controller and app can show up to 12 months of historical measurements and alarms.

Frequently Asked Questions

Q: Are dosing pumps included?
A: No. The modular dosing pumps are not included and must be purchased separately. Plan for one pH pump and one to five EC pumps, depending on your setup.

Q: Can I use it for pH only or EC only?
A: Yes. The controller works as a combined pH and EC controller, a standalone pH controller or a standalone EC controller. Connect only the pumps you need.

Q: What does the 6 bar rating mean?
A: It is the maximum pressure the inline electrodes are rated for. This lets you install them in pressurized pipelines rather than only in an open tank.

Q: How do the electrodes mount?
A: They are designed for 3/4-in saddle clamps. Check that your pipework suits this fitting before you order.

Q: Can I monitor it remotely?
A: Yes. The free Aqua Master Tools app for iOS and Android sends alarm notifications and shows real-time and historical graphs. You can also adjust dosing settings and set points remotely.

Q: What does EC measure?
A: EC is electrical conductivity, an indicator of how concentrated the dissolved nutrients in a solution are. The controller uses it to decide when to dose nutrients.