Raindrip Full Circle Adjustable Rotary Sprinkler with Riser - 8in Stake and 4in Riser - 2pk

Raindrip Full Circle Adjustable Rotary Sprinkler with Riser - Elevated Spray Coverage for Garden Irrigation

The Raindrip Full Circle Adjustable Rotary Sprinkler with Riser combines full-circle adjustable spray coverage with an elevated mounting configuration for improved spray clearance above low-growing plants, mulch, and ground cover. The included 8in stakes and 4in risers position the sprinkler head above the plant canopy for unobstructed 360-degree distribution across coverage areas up to 15ft in diameter. The adjustable knob controls both flow and spray diameter for flexible zone customization across different planting areas. Comes in a 2-pack for paired zone installations.

Key Features & Benefits

• Elevated Riser Configuration: The 4in riser lifts the sprinkler head above low-growing ground cover, mulch, and plant foliage for unobstructed full-circle spray distribution.
• 8in Stake for Stable Anchoring: The 8in ground stake provides secure positioning in garden soil and mulched beds, keeping the riser and sprinkler head stable during irrigation.
• Full Circle Coverage Up to 15ft: Uniformly distributes water across a full 360-degree pattern with adjustable coverage diameter up to 15ft for flexible zone sizing.
• Adjustable Flow and Diameter Knob: Integrated knob controls both spray diameter and flow rate for field adjustment without tools or head replacement.
• 2-Pack Format: Paired units support symmetrical zone coverage or simultaneous installation in two separate garden areas with consistent head performance.

Who Should Use This

Designed for gardeners using low-volume drip and micro-irrigation systems in garden beds and ground cover areas where elevated spray head positioning improves coverage efficiency. Well suited for installations where standard stake-only heads are blocked by plant growth or mulch depth.

Compatibility

Compatible with standard Raindrip and low-volume micro-irrigation system components. The riser and stake connect to the sprinkler head and standard 1/4in supply fittings. Verify system operating pressure for optimal rotary spray performance.

Frequently Asked Questions

Why use a riser instead of a standard stake?

A riser elevates the sprinkler head above the soil surface and plant canopy, allowing the full-circle spray pattern to distribute water without obstruction from low-growing plants, mulch, or ground cover that would otherwise deflect or block the spray.

Can I use the stake without the riser?

Yes - the 8in stake can be used independently to position the head closer to the soil surface if elevated spray clearance is not needed for your specific planting layout.

Is the riser height sufficient for tall ground cover plants?

The 4in riser provides clearance suitable for most low-growing ground cover. For taller plants, consider using an additional riser extension if available, or reposition the stake to a location with better spray clearance.

Can the spray diameter be adjusted while the system is running?

Yes - the adjustment knob can be turned while the system is pressurized and running to observe the coverage pattern and dial in the desired spray diameter for each zone.