Netafim Woodpecker Pressure Compensating Junior Dripper Assembly - 1.0 GPH - 24-in Tubing - 25 Count

Even Water at Every Plant Position - 24-in Tubing Dripper Stake

Hand-watering or uneven emitters leave some containers wet and others dry, so you overwater to cover the gaps. This assembly puts a pressure compensating emitter, 24 inches of tubing and an angled barbed stake in one ready-to-install unit. The emitter adjusts to system pressure so each container receives a consistent flow, and the built-in check valve helps the drippers shut off together.

Each listing is one assembly with a 1.0 GPH emitter. It suits growers who want to add or replace individual plant positions, as well as those building out a larger drip layout one container at a time. Buy it in the quantity your layout needs.

Key Features & Benefits

• Pressure compensating emitter — holds constant flow from 10 to 45 psi, with a compensation range of 7 to 58 psi.
• Built-in check valve — supports instant shut-off when the system stops.
• 24 in Super Flex UV white polyethylene tubing — reaches the container from the supply line and resists UV exposure.
• Angled barbed stake — holds the tubing in place and directs water into the container.
• Slow, low flow — 1.0 GPH wets the media thoroughly without run-off.

Who Should Use Netafim Woodpecker Junior Dripper Assembly

Growers running pots, rock wool cubes or other soilless substrates in hydroponic setups, greenhouses or nurseries will find this useful. It suits both home and licensed commercial operations that need uniform watering per container.

About Netafim Woodpecker Junior Dripper Assembly

Netafim makes drip irrigation components. This assembly combines a 1 GPH pressure compensating emitter with a check valve, 24 inches of Super Flex UV white polyethylene tubing and an angled barbed stake. Minimum operating pressure is 10 psi, and the listed watering uniformity is 94%.

Frequently Asked Questions

Q: What flow rate does this dripper deliver?
A: It delivers 1.0 GPH per emitter. The pressure compensating design keeps that flow steady across its working pressure range.

Q: What pressure does it need?
A: Minimum operating pressure is 10 psi. Constant flow is held from 10 to 45 psi, and the compensation range is listed as 7 to 58 psi.

Q: What does pressure compensating mean?
A: The emitter adjusts internally so output stays consistent as line pressure changes. This helps containers at the start and end of a run, or on slopes, get similar amounts of water.

Q: What does the check valve do?
A: It is built into the emitter and helps the drippers turn off at shut-down. It supports consistent on and off timing across the system.

Q: What is included in each assembly?
A: Each assembly includes a pressure compensating emitter with check valve, 24 inches of Super Flex tubing and an angled barbed stake.

Q: Is the tubing suited to outdoor or greenhouse use?
A: The tubing is UV white polyethylene with excellent UV resistance listed, so it is built for light exposure.