Netafim Woodpecker Pressure Compensating Junior Dripper Assembly - 0.5 GPH - 48 in Tubing - 25 Count

Even Low-Flow Watering at Every Pot - 48 in Tubing

Uneven watering leaves some containers soaked and others dry, and runoff wastes water and nutrient solution. This dripper assembly combines a pressure compensating emitter, tubing and a stake in one ready-to-place unit. Each emitter adjusts to system pressure to hold its flow steady, and the distributor reports watering uniformity of 94%.

This listing is sold each, with 25 pieces per bag as named by the distributor. It suits growers who want to equip a run of pots, cubes or blocks with consistent low-flow watering without cutting and fitting parts one at a time.

Key Features & Benefits

• 0.5 GPH pressure compensating emitter — keeps flow steady across the working pressure range, so each plant gets a similar amount of water.
• Built-in check valve — helps drippers shut off together when the system depressurizes.
• 48 in Super Flex UV White polyethylene tubing — reaches the container from the supply line without extra cutting.
• Angled barbed stake — holds the tubing in place and directs water into the container.
• Low flow rate — wets the media thoroughly with little runoff at the container edge.

Who Should Use Netafim Woodpecker Junior Dripper Assembly

Growers running soilless media, rock wool cubes or potted plants in indoor, greenhouse or nursery setups benefit most. It suits both home gardeners and commercial operations that want uniform watering at each plant position.

About Netafim Woodpecker Junior Dripper Assembly

Netafim makes drip irrigation components. This assembly includes a 0.5 GPH pressure compensating emitter with a check valve, 48 in of tubing and an angled barbed stake. The distributor lists a minimum operating pressure of 10 PSI and a pressure compensation range of 7 to 58 psi.

Frequently Asked Questions

Q: What is included in each assembly?
A: Each assembly includes the dripper with its emitter, 48 in of tubing and an angled barbed stake. You connect it to your supply line and place the stake in the container.

Q: What does pressure compensating mean?
A: A pressure compensating emitter holds its flow rate steady as inlet pressure changes within its working range. This helps the first and last plants on a run receive similar amounts of water.

Q: What is the minimum operating pressure?
A: The distributor lists a minimum operating pressure of 10 PSI. Keep your system at or above that level for consistent flow.

Q: Does it work with hydroponic systems?
A: Yes. The distributor describes it as suited to soilless substrates and hydroponic applications, where each pot or cube needs a measured amount of solution.

Q: What does the check valve do?
A: The built-in check valve helps all drippers start and stop together at system pressurization and shutdown. This limits drain-down and uneven watering.